10-Inch Replacement Cultivator Tines (4 Pack)
In stock
Model
29453
10-Inch Replacement Cultivator Tines (4 Pack) is rated
out of
5 by
6.
$34.99
In stock
- 10" Replacement Cultivator Tines for Greenworks cultivators
- Compatible with Greenworks models 27062 and 27072
Blade Length:
10 Inch
Tine Diameter:
10 in.
Tine Material:
Steel
- (4) 10" Replacement Cultivator Tines
Rated 5 out of
5
by
Mark Sr from
Simple
The Green works 10" Tines were simple to install, was amazed how easy it was to change out the old ones, just remove clips and pull off, install the new ones and you can't get them mixed up, they are properly marked with A thru D and rotation indicator on each one, simple.
Date published: 2021-02-11
Rated 5 out of
5
by
Anonymous from
Greenworks roto tiller
Excellent electric roto tiller perfect for small vegetable garden and flower beds Very reliable would recommend to anyone
Date published: 2020-10-15
Rated 5 out of
5
by
Snazzyribs from
Great product
Used to use full size gas tiller. Now on my third set of blades for this greenworks tiller whichI have used for years. Very pleased.
Date published: 2019-12-08
Rated 2 out of
5
by
Derek B from
Rototiller tines
The tines are pretty weak metal and bend way too easy for a rototiller.
Date published: 2021-03-24
Rated 5 out of
5
by
Mark Sr from
Simple
The Green works 10" Tines were simple to install, was amazed how easy it was to change out the old ones, just remove clips and pull off, install the new ones and you can't get them mixed up, they are properly marked with A thru D and rotation indicator on each one, simple.
Date published: 2021-02-11
Rated 5 out of
5
by
Anonymous from
Greenworks roto tiller
Excellent electric roto tiller perfect for small vegetable garden and flower beds Very reliable would recommend to anyone
Date published: 2020-10-15
Rated 5 out of
5
by
Snazzyribs from
Great product
Used to use full size gas tiller. Now on my third set of blades for this greenworks tiller whichI have used for years. Very pleased.
Date published: 2019-12-08
Rated 2 out of
5
by
Derek B from
Rototiller tines
The tines are pretty weak metal and bend way too easy for a rototiller.
Date published: 2021-03-24
My greenworks cultivator states the tills are 8 in, will these 10 in work. Unfortunately I can no longer see the mode number of my machine.
Hello GabrielIsAskingAQuestion,
Thank you for your question! We are sorry to hear you are experiening some issues finding replacement tines for your cultivator. Please refer to the parts list in the owner’s manual for replacement parts. Parts can be ordered from our third-party part site here: https://greenworks.ordertree.com. If you are unable to locate the part, please send us a photo of the part(s) you are referring to. Simply submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS).
Date published: 2021-07-26
8A electric tiller the clip fell off and all the parts 4 5 6 7 8 9 are missing from part 21 gear assembly
Sorry to hear that you are having an issue with our product. We take each matter very seriously and want to make sure you are happy. At GreenWorks we stand behind each product we manufacture. Please submit an email using the customer contact page on our website or give us a call at 1-888-909-6757 (1-888-90WORKS). All we ask that you have access to the unit so that we can complete troubleshooting with you and gather necessary unit information.
Date published: 2021-04-13
Do the tines come with the pin that secures them in place on the cultivator?
Hello BWoody,
No, this is only the replacement tines (blades). Cotter Pins are not included.
Date published: 2020-06-18
What is the warranty for the tines? I just recently bought a 8.5 amp 11 in electric cultivator from Lowe’s and the times are bent but not broken.
Hello Almz,
The tines are considered wearable parts and not typically covered under warranty. If the tines were bent from use it will not likely qualify for warranty. However, we will be more than happy to take a closer look into this issue with you, please contact us at info@greenworkstools.com for further assistance. Replacement tines can also be purchased here.
Please be advised we are currently experiencing delays due to the current pandemic COVID-19. We apologize for the delay and thank you for your patience and understanding.
Date published: 2020-06-10
Will this tine will fit 27017model
Hello Ketan,
The model 27017 is not showing up for us in the United States GreenWorks Tools products. These replacement tines are for Greenworks Cultivator Models 27062 and 27072.
Date published: 2020-06-08
Do the replacement tines come with cushions and o spring bolt? I need those also.
Hello Flannelcat,
No, the tines come as pictured. The O-springs are no longer included in most units and have been replaced by cotter pins (sold separately). The felts are no longer available nor included they are not required to operate the unit.
Date published: 2020-05-06
Can I attach this to my weedeater
Hello Dino814,
Thank you for your question. Model 29453 is compatible with Greenworks Cultivator Models 27062 and 27072. This item is not recommend for use with a weedeater.
Date published: 2020-05-05
Are these tines compatible with the Greenworks 80V tiller model 2800002?
Hello tfiveegans,
No, these replacements tines are for cultivator Models 27062 and 27072. However, you can use your owner's manual with the part numbers to order replacement blades from our third party parts site here:
https://greenworks.ordertree.com/
Date published: 2020-04-27
