1600-PSI 13 Amp 1.2-GPM Electric Pressure Washer

Out of stock
Model
5100102
1600 PSI Electric Pressure Washer is rated 3.4 out of 5 by 42.
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_40
  • loc_en_US, sid_5100102, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 38.75ms
  • REVIEWS, PRODUCT

Heavy-Duty Power For Every Job!

  • 1600-PSI Electric Pressure Washer With 13-Amp Universal Motor
  • 1.2 GPM (gallons per minute)
  • Perfect Nozzle for Every Surface!
  • PWMA Certified
  • 3 Year Limited Tool Warranty
Special Price $89.99 Regular Price $119.99

SAVE 25% ($30.00)!

Out of stock

TEMPORARILY OUT OF STOCK

Be notified when item becomes available:

  • 1600 PSI at 1.2 GPM will blast through grime and dirt to restore your surfaces
  • Can be used vertically or horizontally for greater stability
  • 20 ft. High pressure hose for greater reach
  • 35 ft. power cord with inline GFCI for use on all exterior outlets
  • Soap applicator to apply soap to completely clean any surface/span>
  • 3 Year Limited Tool Warranty
Brushless Motor:
No
PSI:
1600
GPM:
1.2
Hose Length:
20 Feet
Cord Length:
35 feet
Onboard Tool Storage:
Yes
Soap Tanks:
Single On-Board
Motor Type:
Universal
Quick Connect Nozzles:
Yes
Certifications:
PWMA
Warranty:
3 Years
Battery Capacity:
-
  • (1) Electric Pressure Washer
  • (1) 2o ft. high preesure hose and 35 ft. power cord
  • (1) Soap applicator
  • (1) Owner's Manual

Pressure Washer FAQS

Does my water source have to be a certain PSI to run the unit properly?

Yes, the ideal input pressure is 60 PSI. However, the tolerance of the 60 PSI is 25% (unit tolerates 45-75PSI). If the inlet pressure is below 45 PSI, it will lead to a pressure drop and the machine will not pressurize properly. This often causes the unit to vibrate and sputter. Any higher than 75PSI and the unit may receive internal damage from too much pressure, breaching seals, triggering the thermal valve etc. If the unit does not have the correct PSI, it will not run correctly and the motor can be damaged.


What soap should I use with my pressure washer?

We recommend only using a designated pressure washer soap. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency.


Can I switch between applying soap and rinsing?

Yes, you can! For units with an onboard soap tank: Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line and then you'll have clean water. For units that use a soap bottle: To rinse, you'll have to remove the soap bottle and reattach the wand with the appropriate nozzle that you require for rinsing.


How do I winterize my pressure washer?

See the optimum winterizing procedure below: • Disconnect all water connections (garden hose). • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Use a pressure washer pump saver—follow instructions provided on pump saver. • Roll up the electrical cord and hose neatly, making sure there are no kinks. Ideally, we advise storing the machine and accessories in a room that does not reach freezing temperatures. Do not store near the furnace or other sources of heat as it may dry out the pump seals. Also note that this procedure requires using a pressure washer pump saver that can be purchased at most hardware stores.


Can I use hot water with your pressure washers?

No, we only offer cold water pressure washers. The maximum inlet water temperature should not exceed 104 °F (40 °C).


What size are the threaded fittings on the pressure washer?

All threaded connections on our pressure washers are an M22 14mm fitting.


What size are the nozzles?

Our pressure washers use ¼” quick connect nozzles.


My pressure washer will not start, or I have started the pressure washer, but it keeps shutting off after pulsating and does not reach high pressure. What’s wrong?

There are a few factors that could cause these reactions such as excess air in the pump or a clogged/faulty nozzle. See all troubleshooting options below. Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down. Additional components to check: • Ensure a nozzle is connected. Be sure to try all nozzles. • Ensure that the water source is fully opened and is at least 60PSI (Refer to: Does my water source have to be of a certain PSI to run the unit properly?) • Check that there is at least 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water from going into the unit and prevent proper pressure. • For best results, use a 1” (25 mm) or 5/8” (16 mm) garden hose. • Check that the water inlet is not clogged. Disconnect the garden hose, remove the filter and rinse with warm water. • Make sure you are using a working outlet. Be sure to try more than one!


Can I use a longer high-pressure hose?

Yes, you may use a longer high-pressure hose but please note that the pressure will drop.


Do you offer extension wands?

Unfortunately, we do not offer extension wands. While you may find something compatible with another brand, know that the pressure could be affected.


What uses are the different nozzles ideal for?

0° - Red nozzle: This nozzle is typically used for removing tough stains like rust and debris from concrete and metal. You can also use it for removing caked on mud from heavy construction, farm, or lawn equipment. Do not use this nozzle on wood or home siding or for washing a car because this stream is very powerful and can damage a soft surface. 15° – Yellow nozzle: The yellow pressure washer tip provides high versatility with its 15-degree angle tip. Referred to as the washing tip, it provides plenty of pressure to remove dirt from many surfaces without damage. This pressure washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip is versatile due to its wide area of cleaning and strong pressure application. 25° – Green nozzle: The green colored, 25-degree nozzle is best used to sweep away dirt and mud. Use it to sweep away leaves from decks, driveways, and sidewalks. It can also be used for removing light mildew stains, algae, and bacteria build up from pools. 40° – White nozzle: The white 40-degree tip, referred to as the “fan” tip, creates the widest area of cleaning with relatively low pressure. This pressure washer tip is best used for delicate cleaning applications. It's recommended for light cleaning on wood decks and other soft surfaces. 75° Soap – Black nozzle: The black colored nozzle is a low-pressure detergent nozzle. You use this when applying your preferred detergent for your cleaning projects. Turbo Nozzle: This nozzle rotates in a zero-to-15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches wide depending on the distance between the tip and the surface being cleaned.


Why isn’t my unit reaching high pressure?

Please check the following if your unit is not reaching high pressure: • You are using a 1” (25 mm) or 5/8” (16 mm) garden hose. • There are no kinks, leaks, or blockages at the inlet filter or in the garden or high-pressure hose. • The water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI). • A high-pressure nozzle is installed. • There is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit on.


Why won’t my pressure washer start?

Please be sure to go through the possible causes below: • Make sure the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit back on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up.


The soap is only coming out at low pressure. Why?

This is normal. Our units are designed to apply soap at low pressure. If a higher-pressure soap application is desired, we kindly refer you to our high-pressure soap bottle model 51362.


Why isn’t soap coming out?

For units with an onboard soap tank: • Ensure that the black soap nozzle is installed and unobstructed. Try blowing through it or use your nozzle cleaning tool to poke out any debris. • The detergent tube may be clogged or damaged. Try removing it and running some warm water through it to clean it and/or to identify damage. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. For units that use a soap bottle: • Make sure that soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the opening.


My nozzles are missing. Where can I find them?

Depending on the pressure washer you purchased, the nozzles can be found either stored directly on the body of the pressure washer, the front panel assembly, or in the gun handle. If the nozzles are missing, you will see empty holes with rubber gromets inside. If you have verified that they are missing, please contact us at 1-888-909-6757 (1-888-90WORKS). We're happy to help!


The pressure washer starts and then shuts off. Why?

If your pressure washer is experiencing this issue it can often be resolved with the below troubleshooting: Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down.


Rated 5 out of 5 by from It has great features which is really cool It has great features which is really cool And it’s got the soap container and it’s lightweight and the wheels around easily being I’m 70 years old I don’t need nothing heavy
Date published: 2022-03-15
Rated 5 out of 5 by from 1600 psi Pressure Washer Mighty pressure washer. Not heavy for moving around, enough power to do a great job.
Date published: 2022-02-22
Rated 5 out of 5 by from Works Wonderfully I bought this product about a few months ago and it works very well. Very easy to set up, car safe, and rinses off my car very well. Glad I bought this item. Thanks :)
Date published: 2021-11-24
Rated 5 out of 5 by from For The Money For the money, I doubt you could buy a harder worker. Does a good job and will clean years of neglect from your projects.
Date published: 2021-11-12
Rated 5 out of 5 by from PLEASANTLY SURPRISED Purchased this unit a month ago to use around the house. Have used gas powered units before. However, have always believed those to be overkill for the homeowner. Took about 20 minutes to put together out of the box. Read the priming instructions ... plugged it in / hosed it up ... chose my tip ... went right to work. Power washed the deck, the driveway, the front steps and the four Adirondack chairs around the firepit. This first usage went from wood to concrete back to wood, performing well each time. It is important to use the correct tip, not wanting to damage the item you are working on. When power washing, take note of your travel with respect to electrical cord, water hose and pressure hose. Keeping these organized as you move forward with your project keeps any tangled items away. Truly like the feature of the "auto-off" when releasing the trigger. It keeps the noise level down, which is already considerably low in comparison to gas. Overall .... big fan of this electric unit. It handled all that we placed on the list. In comparison to the gas ones ... so much quieter / no exhaust fumes / no gas in the yard. FYI ... I am a tool guy, believing in overbuying on tools, as you might need it some day. With the electric power washers, I did not think this logic was possible. Boy was i incorrect ... nice to be proved wrong. Highly recommend this unit to any homeowner.
Date published: 2021-07-26
Rated 5 out of 5 by from Perfect for home needs I bought this on advice of a friend, replacing a more powerful gasoline model. Our main needs are to clean our composite deck and concrete driveway. It does a great job and is so much easier to set up and use than my gas model. Small footprint when stored is another great plus.
Date published: 2021-06-24
Rated 5 out of 5 by from Great tool for the price I bought this one because I borrowed an old one from my handyman. It worked great! Just using it for home use: washing the car, the house, and the driveway. It's easy to hook up and the cords and the hoses are long enough that I don't have to move it around all the time. For the price-point, I wish I had gotten one a few years ago!
Date published: 2020-10-15
Rated 5 out of 5 by from Beautiful to use and own I bought this pressure washer and use it for everything around my home that needs cleaning. The cement drive, my cars, the tires, the mildew on the vinyl siding, and the street curb in front of my home!
Date published: 2020-09-22
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_40
  • loc_en_US, sid_5100102, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.77ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from It has great features which is really cool It has great features which is really cool And it’s got the soap container and it’s lightweight and the wheels around easily being I’m 70 years old I don’t need nothing heavy
Date published: 2022-03-15
Rated 5 out of 5 by from 1600 psi Pressure Washer Mighty pressure washer. Not heavy for moving around, enough power to do a great job.
Date published: 2022-02-22
Rated 5 out of 5 by from Works Wonderfully I bought this product about a few months ago and it works very well. Very easy to set up, car safe, and rinses off my car very well. Glad I bought this item. Thanks :)
Date published: 2021-11-24
Rated 5 out of 5 by from For The Money For the money, I doubt you could buy a harder worker. Does a good job and will clean years of neglect from your projects.
Date published: 2021-11-12
Rated 5 out of 5 by from PLEASANTLY SURPRISED Purchased this unit a month ago to use around the house. Have used gas powered units before. However, have always believed those to be overkill for the homeowner. Took about 20 minutes to put together out of the box. Read the priming instructions ... plugged it in / hosed it up ... chose my tip ... went right to work. Power washed the deck, the driveway, the front steps and the four Adirondack chairs around the firepit. This first usage went from wood to concrete back to wood, performing well each time. It is important to use the correct tip, not wanting to damage the item you are working on. When power washing, take note of your travel with respect to electrical cord, water hose and pressure hose. Keeping these organized as you move forward with your project keeps any tangled items away. Truly like the feature of the "auto-off" when releasing the trigger. It keeps the noise level down, which is already considerably low in comparison to gas. Overall .... big fan of this electric unit. It handled all that we placed on the list. In comparison to the gas ones ... so much quieter / no exhaust fumes / no gas in the yard. FYI ... I am a tool guy, believing in overbuying on tools, as you might need it some day. With the electric power washers, I did not think this logic was possible. Boy was i incorrect ... nice to be proved wrong. Highly recommend this unit to any homeowner.
Date published: 2021-07-26
Rated 5 out of 5 by from Perfect for home needs I bought this on advice of a friend, replacing a more powerful gasoline model. Our main needs are to clean our composite deck and concrete driveway. It does a great job and is so much easier to set up and use than my gas model. Small footprint when stored is another great plus.
Date published: 2021-06-24
Rated 5 out of 5 by from Great tool for the price I bought this one because I borrowed an old one from my handyman. It worked great! Just using it for home use: washing the car, the house, and the driveway. It's easy to hook up and the cords and the hoses are long enough that I don't have to move it around all the time. For the price-point, I wish I had gotten one a few years ago!
Date published: 2020-10-15
Rated 5 out of 5 by from Beautiful to use and own I bought this pressure washer and use it for everything around my home that needs cleaning. The cement drive, my cars, the tires, the mildew on the vinyl siding, and the street curb in front of my home!
Date published: 2020-09-22
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_40
  • loc_en_US, sid_5100102, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.77ms
  • REVIEWS, PRODUCT

I purchased mine in April 2020...used a few times, but now the outlet water connector assembly is broken and won't allow the pressure to build up to use. I have a 3 year warranty and want to get mine replaced. Any suggestions?

Asked by: glyn
Hello glyn, Sorry to hear about this experience! It sounds like you will need to contact us directly some further information would be required to be better assist. Please give us a call at 1-888-909-6757 (1-888-90WORKS). All we ask that you have access to the unit so that we can complete troubleshooting with you and gather necessary unit information, and we will be happy to assist with the warranty claims process. We appreciate you bringing this to our attention and look forward to making it right.
Answered by: Greenworks Customer Care
Date published: 2022-06-27

Would you have a GFCI replacement part? Model GPW 1600 S/N GWV3592114 Greenworks 

Asked by: Bryson73
Hello Bryson73, Here is a link to purchase the compatible power cord for model GPW1600! https://greenworks.ordertree.com/catalog/product/view/id/3650628/s/power-cord-assy-18/
Answered by: Greenworks Support
Date published: 2022-06-17

We use this pressure washer with our fire department to clean our hose. It began leaking at the handle. When I took it apart, I found the leak where the seam of the 2 pieces of the interior part. Can we purchase this part?

Asked by: Overton823
Hello Overton823, There is an o-ring in the hose that may need replacing. You may find a replacement at your local hardware store using the following specs: Outside diameter 14mm, rubber 2mm, and inside diameter 10mm. If you continue to experience issues, the gun or hose may need to be replaced. For further assistance, please contact us at 1-888-909-6757 (1-888-90WORKS) or on info@greenworkstoolsl.com.
Answered by: Greenworks Customer Care
Date published: 2021-11-22

We have this unit, we lost the piece that the hose plugs into - it's the green round piece (above the wheel) that the hose plugs into. It spun off and we lost it. I can't find it under the accessories so i can order a new one.

Asked by: AngieM
Hello AngieM, Separate pieces can be purchased through our third-party parts site Order Tree you can access the site HERE: https://greenworks.ordertree.com. Please use the parts list inside your owner's manual. If you are unable to locate the part, please send us a photo of the part(s) you are referring to. Simply give us a call at 1-888-909-6757 (1-888-90WORKS) we would be happy to help find replacement parts for your Pressure Washer.
Answered by: Greenworks Customer Care
Date published: 2021-10-21

Where can I get a wheel kit for my Greenworks GPW1501/GPW 1602 pressure washer?

Asked by: BrainyJanie
Hello BrainyJanie, Unfortunately, we do not make a wheel kit for our units. We apologize for any inconvenience.
Answered by: Greenworks Support Team
Date published: 2021-10-05

Can I get part numbers or measurements for the o-rings inside the wand?  There are two different ones. 

Asked by: dbrich
Hello dbrich, Thank you for your question. The sizing varies depending on when the wand was manufactured. Please see the link below to purchase a replacement for this model. Part number: 31115661 Wand Only (Gun Not Included) https://greenworks.ordertree.com/greenworks-gun-wand-assy-1500-psi-51142-1600-psi-31115661.html
Answered by: Greenworks Support
Date published: 2021-09-23

The auto shut off stopped working, and water leaks from handle now so cannot use even when water is on all the time. Is there a replacement part that will fix the problem?

Asked by: LesMor
Hello LesMor, We are sorry to hear that you are experiencing an issue. We would be happy to investigate your options. Please contact us directly on info@greenworkstools.com and please use the subject line "Help Request - Q&A Response", from there we can put you in contact with one of our product specialists to further discuss the issue in detail.
Answered by: Greenworks Customer Care
Date published: 2021-09-21

Need to order Nr 30 High pressure hose assembly for 1600 PSI/1.2 GPM Electric Pressure Washer GPW 1600 Please quote $ and whether this item is available

Asked by: Anonymous
Hello, Here is a link to our pressure washer hose compatible with GPW1600! https://www.greenworkstools.com/25ft-high-pressure-hose-5200402
Answered by: Greenworks Support
Date published: 2021-08-02
  • y_2022, m_6, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_95
  • loc_en_US, sid_5100102, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 13.85ms
  • QUESTIONS, PRODUCT
1600-PSI 13 Amp 1.2-GPM Electric Pressure Washer
©2021 Greenworks Tools | All Rights Reserved