1700-PSI 1.2-GPM Electric Pressure Washer

In stock
Model
5100402
1700 PSI Electric Pressure Washer is rated 3.0 out of 5 by 6.
  • y_2022, m_6, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_5
  • loc_en_US, sid_5100402, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 9.42ms
  • REVIEWS, PRODUCT

Heavy-duty household cleaning requires tools that are as serious as you are!

  • 1700-PSI Pressure Washer
  • 1.2 GPM (gallons per minute)
  • Perfect Nozzle for Every Surface!
  • PWMA Certified
  • 3 Year Limited Tool Warranty
$129.00
In stock
 
Heavy-Duty Power For Every Job
This powerful 1700-PSI electric pressure washer helps eliminate dirt and grime with 1.2 GPM of exceptional cleaning power. Wheels allow for easy maneuverability while the 25-ft high-pressure hose with reel keeps every job within reach.This reliable unit includes 25° and 40° quick connect tips and a soap attachment for a variety of cleaning applications. A PWMA-certified pressure washer, this model has guaranteed performance from a trusted source.
Key features
1700-PSI and 1.2 GPM - To restore surfaces like new
PWMA Certified
25’ High-Pressure Hose With Reel - Keeps every job within reach
Includes 25° and 40° Quick Connect Tips - With added soap attachment to tackle a variety of jobs
Versatile Design - Can be used vertically or horizontally
1 Year Limited Tool Warranty
The No List
No Gas Smell. You no longer have to smell like gas after cleaning
No Emissions. Save money and breathe clean air
No Maintenance. No tune-ups, no mixing fuels, no messy spills
Low Noise. Easy on the ear, low decibel cleaning
Warranty + Service
1 year tool limited warranty
Dedicated Support 1-888-909-6757
PSI:
1700
GPM:
1.2
Hose Length:
25 Feet
Cord Length:
35 feet
Onboard Tool Storage:
Yes
Motor Type:
Universal
Spray Pattern 1:
25 Degree
Spray Pattern 2:
40 Degree
Certifications:
PWMA
Warranty:
1 Year
Battery Capacity:
-

Pressure Washer FAQS

Does my water source have to be a certain PSI to run the unit properly?

Yes, the ideal input pressure is 60 PSI. However, the tolerance of the 60 PSI is 25% (unit tolerates 45-75PSI). If the inlet pressure is below 45 PSI, it will lead to a pressure drop and the machine will not pressurize properly. This often causes the unit to vibrate and sputter. Any higher than 75PSI and the unit may receive internal damage from too much pressure, breaching seals, triggering the thermal valve etc. If the unit does not have the correct PSI, it will not run correctly and the motor can be damaged.


What soap should I use with my pressure washer?

We recommend only using a designated pressure washer soap. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency.


Can I switch between applying soap and rinsing?

Yes, you can! For units with an onboard soap tank: Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line and then you'll have clean water. For units that use a soap bottle: To rinse, you'll have to remove the soap bottle and reattach the wand with the appropriate nozzle that you require for rinsing.


How do I winterize my pressure washer?

See the optimum winterizing procedure below: • Disconnect all water connections (garden hose). • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Use a pressure washer pump saver—follow instructions provided on pump saver. • Roll up the electrical cord and hose neatly, making sure there are no kinks. Ideally, we advise storing the machine and accessories in a room that does not reach freezing temperatures. Do not store near the furnace or other sources of heat as it may dry out the pump seals. Also note that this procedure requires using a pressure washer pump saver that can be purchased at most hardware stores.


Can I use hot water with your pressure washers?

No, we only offer cold water pressure washers. The maximum inlet water temperature should not exceed 104 °F (40 °C).


What size are the threaded fittings on the pressure washer?

All threaded connections on our pressure washers are an M22 14mm fitting.


What size are the nozzles?

Our pressure washers use ¼” quick connect nozzles.


My pressure washer will not start, or I have started the pressure washer, but it keeps shutting off after pulsating and does not reach high pressure. What’s wrong?

There are a few factors that could cause these reactions such as excess air in the pump or a clogged/faulty nozzle. See all troubleshooting options below. Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down. Additional components to check: • Ensure a nozzle is connected. Be sure to try all nozzles. • Ensure that the water source is fully opened and is at least 60PSI (Refer to: Does my water source have to be of a certain PSI to run the unit properly?) • Check that there is at least 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water from going into the unit and prevent proper pressure. • For best results, use a 1” (25 mm) or 5/8” (16 mm) garden hose. • Check that the water inlet is not clogged. Disconnect the garden hose, remove the filter and rinse with warm water. • Make sure you are using a working outlet. Be sure to try more than one!


Can I use a longer high-pressure hose?

Yes, you may use a longer high-pressure hose but please note that the pressure will drop.


Do you offer extension wands?

Unfortunately, we do not offer extension wands. While you may find something compatible with another brand, know that the pressure could be affected.


What uses are the different nozzles ideal for?

0° - Red nozzle: This nozzle is typically used for removing tough stains like rust and debris from concrete and metal. You can also use it for removing caked on mud from heavy construction, farm, or lawn equipment. Do not use this nozzle on wood or home siding or for washing a car because this stream is very powerful and can damage a soft surface. 15° – Yellow nozzle: The yellow pressure washer tip provides high versatility with its 15-degree angle tip. Referred to as the washing tip, it provides plenty of pressure to remove dirt from many surfaces without damage. This pressure washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip is versatile due to its wide area of cleaning and strong pressure application. 25° – Green nozzle: The green colored, 25-degree nozzle is best used to sweep away dirt and mud. Use it to sweep away leaves from decks, driveways, and sidewalks. It can also be used for removing light mildew stains, algae, and bacteria build up from pools. 40° – White nozzle: The white 40-degree tip, referred to as the “fan” tip, creates the widest area of cleaning with relatively low pressure. This pressure washer tip is best used for delicate cleaning applications. It's recommended for light cleaning on wood decks and other soft surfaces. 75° Soap – Black nozzle: The black colored nozzle is a low-pressure detergent nozzle. You use this when applying your preferred detergent for your cleaning projects. Turbo Nozzle: This nozzle rotates in a zero-to-15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches wide depending on the distance between the tip and the surface being cleaned.


Why isn’t my unit reaching high pressure?

Please check the following if your unit is not reaching high pressure: • You are using a 1” (25 mm) or 5/8” (16 mm) garden hose. • There are no kinks, leaks, or blockages at the inlet filter or in the garden or high-pressure hose. • The water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI). • A high-pressure nozzle is installed. • There is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit on.


Why won’t my pressure washer start?

Please be sure to go through the possible causes below: • Make sure the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit back on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up.


The soap is only coming out at low pressure. Why?

This is normal. Our units are designed to apply soap at low pressure. If a higher-pressure soap application is desired, we kindly refer you to our high-pressure soap bottle model 51362.


Why isn’t soap coming out?

For units with an onboard soap tank: • Ensure that the black soap nozzle is installed and unobstructed. Try blowing through it or use your nozzle cleaning tool to poke out any debris. • The detergent tube may be clogged or damaged. Try removing it and running some warm water through it to clean it and/or to identify damage. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. For units that use a soap bottle: • Make sure that soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the opening.


My nozzles are missing. Where can I find them?

Depending on the pressure washer you purchased, the nozzles can be found either stored directly on the body of the pressure washer, the front panel assembly, or in the gun handle. If the nozzles are missing, you will see empty holes with rubber gromets inside. If you have verified that they are missing, please contact us at 1-888-909-6757 (1-888-90WORKS). We're happy to help!


The pressure washer starts and then shuts off. Why?

If your pressure washer is experiencing this issue it can often be resolved with the below troubleshooting: Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down.


Rated 5 out of 5 by from 1700 PSI Pressure washer I bought the pressure washer last month but have not been able to use it much due to the cold weather. However, I did have a 3 hour usage of it last weekend and it worked like a charm. I was a bit hesitant at first because I had made the connections and could get nothing to happen, not even the pressure working up in the machine. I was surprised that when I pulled the trigger to see if that did any good, presto, the machine worked and continued working for 3 hours. I was the one that wore out, not the pressure washer. Just waiting for warmer weather to do some more work with it. Hesitant in the beginning but well satisfied now.
Date published: 2022-01-28
Rated 5 out of 5 by from What a Great Little Power Washer I have purchased three of these to use at different locations. I use one to wash the car, one to clean the walks, and one to clean my boats. The size is great for easy transport and the power handles even the dirtiest job! I bought the pressure washer round cleaning attachment for the walks and it make the job much easier and looks better too!
Date published: 2021-07-22
Rated 5 out of 5 by from 1700 PSI Pressure Washer I bought this about 3 weeks ago. Excellent Pressure Washer, light weight, easy to handle, perfect for small jobs like Windows, Doors and brick steps.
Date published: 2020-12-20
Rated 1 out of 5 by from A few design flaws Item works well but you have to unhook the hose in order to wind it up and the gun drags on the ground when in the holder.
Date published: 2022-06-22
Rated 1 out of 5 by from Pressure Washer Your product is terrible. I’ve had to replace the wand twice as well as some of the connections.
Date published: 2021-03-12
  • y_2022, m_6, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_5
  • loc_en_US, sid_5100402, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.01ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from 1700 PSI Pressure washer I bought the pressure washer last month but have not been able to use it much due to the cold weather. However, I did have a 3 hour usage of it last weekend and it worked like a charm. I was a bit hesitant at first because I had made the connections and could get nothing to happen, not even the pressure working up in the machine. I was surprised that when I pulled the trigger to see if that did any good, presto, the machine worked and continued working for 3 hours. I was the one that wore out, not the pressure washer. Just waiting for warmer weather to do some more work with it. Hesitant in the beginning but well satisfied now.
Date published: 2022-01-28
Rated 5 out of 5 by from What a Great Little Power Washer I have purchased three of these to use at different locations. I use one to wash the car, one to clean the walks, and one to clean my boats. The size is great for easy transport and the power handles even the dirtiest job! I bought the pressure washer round cleaning attachment for the walks and it make the job much easier and looks better too!
Date published: 2021-07-22
Rated 5 out of 5 by from 1700 PSI Pressure Washer I bought this about 3 weeks ago. Excellent Pressure Washer, light weight, easy to handle, perfect for small jobs like Windows, Doors and brick steps.
Date published: 2020-12-20
Rated 1 out of 5 by from A few design flaws Item works well but you have to unhook the hose in order to wind it up and the gun drags on the ground when in the holder.
Date published: 2022-06-22
Rated 1 out of 5 by from Pressure Washer Your product is terrible. I’ve had to replace the wand twice as well as some of the connections.
Date published: 2021-03-12
  • y_2022, m_6, d_29, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_1, tr_5
  • loc_en_US, sid_5100402, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.01ms
  • REVIEWS, PRODUCT

Where can l buy a hose for a green work 1700psi

Asked by: Poobear
Hello Poobear, This pressure washer is compatible with any of the following hoses! https://www.greenworkstools.com/25ft-high-pressure-hose-5200402 https://www.greenworkstools.com/30-foot-high-pressure-washer-hose-5207002-b https://www.greenworkstools.com/4500-psi-replacement-pressure-washer-hose-25-ft
Answered by: Greenworks Support
Date published: 2022-06-14

Can't get the Soap Dispenser to work. Can you provide any help?

Asked by: Robbie C
Hello Robbie C, We are sorry to hear this! Please review the troubleshooting steps below. • Make sure that the soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted; soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the orifice. If issues persist, please contact us at 1-888-909-6757 (1-888-90WORKS).
Answered by: Greenworks Support
Date published: 2022-06-13

What size O ring does the hose use?

Asked by: JFG3
Hello JFG3, Outside Diameter: 14mm Rubber: 2mm Inside: 10mm
Answered by: Greenworks Support
Date published: 2022-06-13

I need an owners manual

Asked by: Fox6
Here is a link to the owners manual! https://images.homedepot-static.com/catalog/pdfImages/2b/2bc72e2e-3551-41b0-b296-e3b76716e149.pdf
Answered by: Greenworks Support
Date published: 2022-06-06

My wheel broke off can I get replacements?

Asked by: pskipper
Hello pskipper, The wheels are currently out of stock but we encourage you to follow up with us at a later time! If the under is within its warranty, we encourage you to contact us for further assistance at 1-888-909-6757 (1-888-90WORKS).
Answered by: Greenworks Support
Date published: 2022-04-29

Do you have replacement wheels for the 1700?

Asked by: Kit S
Hello Kit S, If you have an item number (located in the manual) you can order from our third-party part site here: https://greenworks.ordertree.com/ Replacement parts can also be ordered directly from GreenWorks kindly contact us at 1-888-909-6757 (1-888-90WORKS).
Answered by: Greenworks Customer Care
Date published: 2020-06-29

What is the physical size of this unit? W x D x H. Thx. 

Asked by: Ed H
Hello Ed, Here is the dimension of this unit: 13.2 x 24 x 11.2 inches.
Answered by: GWT Customer Support
Date published: 2020-06-24

I need a replacement hose part 31121363 can I order it from you or where can I get one ? Tried amazon and it’s not available it’s a free works 1700 psi pressure washer , I live in Florida zip code 32853 Merritt Island 

Asked by: Cindy j
Hello Cindy j, Unfortunately, hose 31121363 is no longer available. The unit has been discontinued for quite some time. We apologize for any inconvenience this news may have caused you.
Answered by: GWT Customer Support
Date published: 2020-06-18
  • y_2022, m_6, d_29, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_49
  • loc_en_US, sid_5100402, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 12.35ms
  • QUESTIONS, PRODUCT

Related products

Check items to add to the cart or
1700-PSI 1.2-GPM Electric Pressure Washer
©2021 Greenworks Tools | All Rights Reserved