Universal 1/4" x 30-ft High Pressure Washer Hose

In stock
Model
5207002-B
Universal 1/4" x 30-ft High Pressure Washer Hose is rated 4.2 out of 5 by 5.
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_5207002-b, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 5.08ms
  • REVIEWS, PRODUCT
  • Made in the USA
$29.99
In stock
 
Product intro
This Greenworks 30 foot poly-flex hose is a great extension for any pressure washer! Used as a replacement for a worn or damaged hose, or as an upgrade, this hose will strengthen any cold water pressure washer with up to 3100-PSI. The flexibility will help prevent kinks and allow the homeowner to thoroughly tackle the job at hand. The polyurethane coating provides greater durability but is still easy to maneuver. M22 couplers allow fast and easy hook ups for most gas or electric pressure washers.
Key features
Made in the USA
Poly-flex material provides durability & flexibility
1/4" x 30' kink-resistant high pressure hose rated up to 3100-PSI
Non-marring polyurethane coating for greater durability, strength & life of the hose
Bend restrictors extend hose life by reducing wear & tear
May be used as a replacement hose, upgrade or extension hose – M22 male to male adapter included
Designed to fit most gas or electric pressure washers up to 3100-PSI
Universal Fit:
Yes
Hose Length:
30 Feet
Battery Capacity:
-
Quick Connect Size:
1/4 Inch
  • (1) Universal 1/4" x 30-ft High Pressure Washer Hose
  • (1) M22 Male to Male Adapter
  • (1) Owner's Manual

Pressure Washer FAQS

Does my water source have to be a certain PSI to run the unit properly?

Yes, the ideal input pressure is 60 PSI. However, the tolerance of the 60 PSI is 25% (unit tolerates 45-75PSI). If the inlet pressure is below 45 PSI, it will lead to a pressure drop and the machine will not pressurize properly. This often causes the unit to vibrate and sputter. Any higher than 75PSI and the unit may receive internal damage from too much pressure, breaching seals, triggering the thermal valve etc. If the unit does not have the correct PSI, it will not run correctly and the motor can be damaged.


What soap should I use with my pressure washer?

We recommend only using a designated pressure washer soap. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency.


Can I switch between applying soap and rinsing?

Yes, you can! For units with an onboard soap tank: Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line and then you'll have clean water. For units that use a soap bottle: To rinse, you'll have to remove the soap bottle and reattach the wand with the appropriate nozzle that you require for rinsing.


How do I winterize my pressure washer?

See the optimum winterizing procedure below: • Disconnect all water connections (garden hose). • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Use a pressure washer pump saver—follow instructions provided on pump saver. • Roll up the electrical cord and hose neatly, making sure there are no kinks. Ideally, we advise storing the machine and accessories in a room that does not reach freezing temperatures. Do not store near the furnace or other sources of heat as it may dry out the pump seals. Also note that this procedure requires using a pressure washer pump saver that can be purchased at most hardware stores.


Can I use hot water with your pressure washers?

No, we only offer cold water pressure washers. The maximum inlet water temperature should not exceed 104 °F (40 °C).


What size are the threaded fittings on the pressure washer?

All threaded connections on our pressure washers are an M22 14mm fitting.


What size are the nozzles?

Our pressure washers use ¼” quick connect nozzles.


My pressure washer will not start, or I have started the pressure washer, but it keeps shutting off after pulsating and does not reach high pressure. What’s wrong?

There are a few factors that could cause these reactions such as excess air in the pump or a clogged/faulty nozzle. See all troubleshooting options below. Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down. Additional components to check: • Ensure a nozzle is connected. Be sure to try all nozzles. • Ensure that the water source is fully opened and is at least 60PSI (Refer to: Does my water source have to be of a certain PSI to run the unit properly?) • Check that there is at least 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water from going into the unit and prevent proper pressure. • For best results, use a 1” (25 mm) or 5/8” (16 mm) garden hose. • Check that the water inlet is not clogged. Disconnect the garden hose, remove the filter and rinse with warm water. • Make sure you are using a working outlet. Be sure to try more than one!


Can I use a longer high-pressure hose?

Yes, you may use a longer high-pressure hose but please note that the pressure will drop.


Do you offer extension wands?

Unfortunately, we do not offer extension wands. While you may find something compatible with another brand, know that the pressure could be affected.


What uses are the different nozzles ideal for?

0° - Red nozzle: This nozzle is typically used for removing tough stains like rust and debris from concrete and metal. You can also use it for removing caked on mud from heavy construction, farm, or lawn equipment. Do not use this nozzle on wood or home siding or for washing a car because this stream is very powerful and can damage a soft surface. 15° – Yellow nozzle: The yellow pressure washer tip provides high versatility with its 15-degree angle tip. Referred to as the washing tip, it provides plenty of pressure to remove dirt from many surfaces without damage. This pressure washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip is versatile due to its wide area of cleaning and strong pressure application. 25° – Green nozzle: The green colored, 25-degree nozzle is best used to sweep away dirt and mud. Use it to sweep away leaves from decks, driveways, and sidewalks. It can also be used for removing light mildew stains, algae, and bacteria build up from pools. 40° – White nozzle: The white 40-degree tip, referred to as the “fan” tip, creates the widest area of cleaning with relatively low pressure. This pressure washer tip is best used for delicate cleaning applications. It's recommended for light cleaning on wood decks and other soft surfaces. 75° Soap – Black nozzle: The black colored nozzle is a low-pressure detergent nozzle. You use this when applying your preferred detergent for your cleaning projects. Turbo Nozzle: This nozzle rotates in a zero-to-15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches wide depending on the distance between the tip and the surface being cleaned.


Why isn’t my unit reaching high pressure?

Please check the following if your unit is not reaching high pressure: • You are using a 1” (25 mm) or 5/8” (16 mm) garden hose. • There are no kinks, leaks, or blockages at the inlet filter or in the garden or high-pressure hose. • The water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI). • A high-pressure nozzle is installed. • There is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit on.


Why won’t my pressure washer start?

Please be sure to go through the possible causes below: • Make sure the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit back on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up.


The soap is only coming out at low pressure. Why?

This is normal. Our units are designed to apply soap at low pressure. If a higher-pressure soap application is desired, we kindly refer you to our high-pressure soap bottle model 51362.


Why isn’t soap coming out?

For units with an onboard soap tank: • Ensure that the black soap nozzle is installed and unobstructed. Try blowing through it or use your nozzle cleaning tool to poke out any debris. • The detergent tube may be clogged or damaged. Try removing it and running some warm water through it to clean it and/or to identify damage. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. For units that use a soap bottle: • Make sure that soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the opening.


My nozzles are missing. Where can I find them?

Depending on the pressure washer you purchased, the nozzles can be found either stored directly on the body of the pressure washer, the front panel assembly, or in the gun handle. If the nozzles are missing, you will see empty holes with rubber gromets inside. If you have verified that they are missing, please contact us at 1-888-909-6757 (1-888-90WORKS). We're happy to help!


The pressure washer starts and then shuts off. Why?

If your pressure washer is experiencing this issue it can often be resolved with the below troubleshooting: Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down.


Rated 5 out of 5 by from Universal 30 ft. Hose Bought a Greenworks pressure washer combo kit from local home improvement store which included a smaller length hose. Bought this one to add additional length and I love it. No loss of pressure, easy to connect, and I can reach everywhere I need to.
Date published: 2022-06-26
Rated 5 out of 5 by from The Great Blue Snake I purchased the 30 foot extension hose for my Greenworks Pro 2300 PSI/2.3 GPM Pressure Washer to extend the useable distance of the wand without having to move the machine. It was a excellent purchase, as having to move the machine when, for example, washing a car, would be time consuming and inconvenient. With the extension added to the original 25 foot hose which came with the machine, I now able to reach to 55 feet without having to move the machine. This is particularly useful in washing items which are at a distance from the house on my 2/3 acre lot.
Date published: 2022-05-01
Rated 5 out of 5 by from Washer Hose Washer hose is excellent and does not kink. Quality material and perfect length.
Date published: 2022-03-04
Rated 5 out of 5 by from It really works! So much better than the original! It even looks prettier. A perfect hose to get the job done. The original hose sprung a leak and propelled a fine spray that seemed to follow me no matter how I tried to avoid getting wet.
Date published: 2021-11-04
Rated 1 out of 5 by from Didn't fit my pressure washer It doesn't fit my pressure washer even when it said it would
Date published: 2022-05-13
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_5207002-b, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.83ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Universal 30 ft. Hose Bought a Greenworks pressure washer combo kit from local home improvement store which included a smaller length hose. Bought this one to add additional length and I love it. No loss of pressure, easy to connect, and I can reach everywhere I need to.
Date published: 2022-06-26
Rated 5 out of 5 by from The Great Blue Snake I purchased the 30 foot extension hose for my Greenworks Pro 2300 PSI/2.3 GPM Pressure Washer to extend the useable distance of the wand without having to move the machine. It was a excellent purchase, as having to move the machine when, for example, washing a car, would be time consuming and inconvenient. With the extension added to the original 25 foot hose which came with the machine, I now able to reach to 55 feet without having to move the machine. This is particularly useful in washing items which are at a distance from the house on my 2/3 acre lot.
Date published: 2022-05-01
Rated 5 out of 5 by from Washer Hose Washer hose is excellent and does not kink. Quality material and perfect length.
Date published: 2022-03-04
Rated 5 out of 5 by from It really works! So much better than the original! It even looks prettier. A perfect hose to get the job done. The original hose sprung a leak and propelled a fine spray that seemed to follow me no matter how I tried to avoid getting wet.
Date published: 2021-11-04
Rated 1 out of 5 by from Didn't fit my pressure washer It doesn't fit my pressure washer even when it said it would
Date published: 2022-05-13
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_5207002-b, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.83ms
  • REVIEWS, PRODUCT

Will this connect to my 1600 electric power washer?  Do I need to buy another connector.

Asked by: Sandi Sue
Hello Sandi Sue, This unit is designed to fit most gas or electric pressure washers up to 3100-PSI that use an M22 fitting.
Answered by: Greenworks Support
Date published: 2022-06-22

Is it possible to purchase this hose without M22 adapter attached to one end. I need it to look like the one on your website, both ends the same without M22 attached.

Asked by: Ben Y
Hello Ben Y, We do not sell the hose without connectors on the end. We're sorry for any inconvenience.
Answered by: Greenworks Support
Date published: 2022-06-09

I have a greenworks 1800 PSI pressure washer. I can't stand the hose, it's stiff, it doesn't roll up easy, and I really can't stand using it. It fights me when trying to wrap it up. Is this universal hose less stiff and does it roll up easier?

Asked by: JaredDK
Hello JaredDK, This hose is made of poly-flex material for increased durability & flexibility in comparison to our standard hose.
Answered by: Greenworks Support
Date published: 2022-06-07

I also need the gun and I don't see it on your website

Asked by: Anonymous
Hello, Can you please repot this question while including the model number of the pressure washer that you require the gun for? Alternatively, you may give us a call for assistance at 1-888-909-6757 (1-888-90WORKS).
Answered by: Greenworks Support
Date published: 2022-05-25

is this hose compatible with GPW1704

Asked by: dhdt
Hello dhdt, Yes, this hose may be used with model GPW1704.
Answered by: Greenworks Support
Date published: 2022-05-24

I recently bought this 30-foot hose. It came with an adapter attached. Does that mean that I can add it to the existing 25-foot hose? I realize that I will lose some pressure at the nozzle. Thanks.

Asked by: neuh
Hello neuh, Yes, this hose can be used as a replacement hose, upgrade or extension hose – M22 male to male adapter included. While you may use a longer high-pressure hose with your unit, the pressure will drop.
Answered by: Greenworks Support
Date published: 2022-04-22

I bought a GPW 3000 from Lowes and my old 3000PSI ext hose measures 14mm (female end) but is slightly too large for your device.  Is your fitting proprietary?  It accepts your female end.

Asked by: Guitarguy1963
Hello Guitarguy1963, Our hoses utilize a fairly standard M22 14MM connection.
Answered by: Greenworks Support
Date published: 2022-04-26

Can you add this to another hose to get over 50 feet of hose at once ?

Asked by: Cgoose
Hello Cgoose, No, the two hoses would not connect without an adaptor. Please also keep in mind that using an additional hose could result in a loss of pressure.
Answered by: Greenworks Customer Care
Date published: 2022-04-18
  • y_2022, m_6, d_29, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_24
  • loc_en_US, sid_5207002-b, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.78ms
  • QUESTIONS, PRODUCT

Related products

Check items to add to the cart or
Universal 1/4" x 30-ft High Pressure Washer Hose
©2021 Greenworks Tools | All Rights Reserved