80V 20" Pole Hedge & 10" Pole Saw Combo w/ 2.0 Ah Battery & Charger

In stock
Model
1313302
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 37.81ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Cut, trim, and clean up those hard to reach areas!

  • Cut Capacity: 3/4" hedge cut capacity 10" Diameter cut capacity
  • Blades: 20" Dual action Blade & 10" Bar and chain
  • Motor: TruBrushless
  • Runtime: 55 minutes (with included 2.0Ah Battery)
  • What's Included: 2.0 Ah battery and Rapid Charger
  • Power 50+ Tools with any Greenworks 80V Battery
$399.99
In stock
 
Cut, trim, and clean up those hard to reach areas!
The powerful Greenworks 80V cordless battery platform gives you all the power you need to tackle all your lawn care projects. Kick gas to the curb this spring and go green with no fumes, no mixing, no maintenance and no pull cords. Let Greenworks help you take the work out of yard work.

Zero gas smell. Zero pull cords. Zero maintenance. Zero pollution breathed. Zero time wasted.

Key features
Pole hedge trimmer features a 20" laser cut Steel blades
Pole saw features a 10" Bar and Chain
Intelligent TRUBRUSHLESSTM Motor Technology - 2x more torque, more power, longer runtimes, quiet operation, and extended motor life
Ideal for yard clean up, storm clean up and general pruning & limbing when extended reach is needed
No prime, no choke, no pull easy-starting system for fasts starts every time
Includes a 80V 2.0 Ah battery and Rapid charger
Battery Powers 50+ 80V Products - One battery to mow, blow, cut, trim, cultivate, and more!
The No List
No Gas Smell. You no longer have to smell like gas after mowing
No Emissions. Save money and breathe clean air
No Maintenance. No tune-ups, no mixing fuels, no messy spills
Low Noise. Easy on the ear, low decibel mowing
Warranty + Service
4 year tool limited warranty
4 year battery warranty
Dedicated Support 1-888-909-6757
Power 50+ Tools with any Greenworks 80V Battery
Power:
Cordless
Voltage:
80V
Brushless Motor:
Yes
Blade Length:
20 Inch
Tool Warranty:
4 Years
Battery Warranty:
4 Years
Battery Capacity:
-
Battery Chemistry:
Li-Ion
  • (1) 80V 20" Pole Hedge/ 10" Pole Saw Combo
  • (1) 80V 2.0Ah Battery
  • (1) Rapid Charger
  • (1) Owner's Manual

Hedge Trimmer FAQs

Are replacement blades available?

No. The blade is a part of the motor assembly and is not able to be easily replaced by the customer—the blade should be sharpened instead. In most cases, it's required to take the unit to a qualified technician for sharpening. We do not advise the customer to sharpen hedge trimmer blades themselves unless they are familiar with this task.


Can a pole be attached to make this a pole hedge trimmer?

Unfortunately, this is not an option for our designated handheld trimmers.


What should I do if the blade has jammed (motor hums, blades not moving)?

"Option A – Model has an anti-jamming function: If the branch is blocked in the blade, press the anti-jamming button on the control panel, the blade will reverse twice then the branch will release. You can clean the blades by removing any other dirt and debris using a paint brush and then applying a light machine oil—WD-40 or a similar product is recommended. Option B – Model does not have an anti-jamming function: To fix a jam, start by removing the battery or unplugging your unit. Clear the debris and then clean the blades by removing any dirt and leftover debris using a paint brush and then applying a light machine oil—WD-40 or a similar product is recommended."


Why aren’t my blades cutting well?

Typically, this is because of sap or debris being caught between the blades (refer to above cleaning instructions) or the blade needs to be sharpened.


Is there an auto button so that I don't have to continuously hold down the trigger?

No. As a safety precaution, none of our hedge trimmers have an automatic on button that will allow the customer to operate the unit without holding onto the trigger.


What oil do I use to lubricate the blades?

Use a light machine oil to lubricate the blades.


What is the run time?

Hedge trimmers that come with a 2.0Ah battery can provide up to 50 minutes of run time under a light load. However, run time will vary depending on the battery and how the trimmer is being used.


Which hedge trimmer is right for me?

Like many of our tools, hedge trimmers are produced in a wide range of size and power. Our lightweight 2.7A is extremely easy to handle and ideal for smaller projects. The G-max pole saw is best for users with tall, difficult to reach hedges. Our 60V and 80V trimmer are perfect for heavy duty, long-period hedge trimming. Commercial users should refer to our 82V line.


What is the cutting capacity?

Depending on the model, cutting capacity varies between 5/8” or 1.2”. Refer to the owner’s manual for specifics.


Why won’t my hedge trimmer turn on?

"Battery operated: A lot of the time this means the battery hasn’t been fully inserted. On both the charger and the unit, you'll know the battery is properly secured in when you hear a click sound. You'll also be able to determine if the battery is fully inserted if you're not able to pull the battery back out without pushing the release button located on the battery. If the handle rotates, ensure that it's locked in position or the unit will not start. Corded: Ensure that the correct extension cord is being used as advised in the ‘Electrical’ section of the manual and that the cord has not become loose at the outlet or on the trimmer. If the handle rotates, ensure that it is locked in position or the unit will not start.


Do I need to put oil in from time to time?

No! Our hedge trimmers are oil free and don't require any oil. However, you can apply general light machine oil to the blade from time to time to help lubricate and maintain the sharpness of the blade.


Does the hedge trimmer have a safety lock if I accidently drop it?

Yes, if the hedge trimmer is accidentally dropped, the hedge trimmer will turn OFF and the blade will coast to a stop after several seconds. The hedge trimmer will then lock in the OFF position.


What is a pole hedge trimmer?

Pole hedge trimmers are regular hedge trimmers attached to a pole. They are used for cutting high hedges without using a ladder.


Can I add additional poles?

No. We do not advise adding additional extensions.


Can the poles be removed to convert to a handheld hedge trimmer?

No. We don't have a model that allows you to convert between a pole hedger and handheld hedge trimmer. However, some models do allow you to remove the middle extension pole to shorten the unit by a few feet.


How should I hold a pole hedge trimmer?

Always hold the unit firmly with both hands. Keep your left hand on the pole shaft and your right hand on the rear handle so your body is to the left of the blade line. Never use a left-handed (cross-handed) grip or any stance that places your body or arm across the blade line. Ensure that you maintain a proper grip on the unit whenever the motor is running. Always keep proper footing and balance—do not overreach. Practicing proper footing and balance ensures that you will have the best control of the tool in unexpected situations. For further details, refer to your owner’s manual.


Can I trim groundcover with a pole hedge trimmer?

Though not advised, this depends on the user's ability to maintain control at an awkward angle. The pole hedger trimmer is ideal for high level and hard to reach branches—it's not ergonomically suited for low cutting and extreme caution should be taken.


Chainsaws & Pole Saws FAQS

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store—no specific brand name is required.


Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them, and the pole saws upright with the motor head at the top. During first use, users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.


How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.


What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thicker objects being cut.


How do I know if my chain is tensioned enough?

A correctly tensioned chain should only pull away from the bar enough to fit a dime (10¢) between the teeth and the bar. Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***


Can I use another brand of chain?

Yes. However, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside your owner’s manual.


What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.


Why isn’t my chain cutting?

If the wood is burning and/or smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times does not increase the cutting speed—this means the chain is worn.


Why does my chain keep falling off?

Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace the parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and causes the chain lean to one side.


Why isn’t my chainsaw turning on?

For chainsaws with an active chain brake, please ensure that it has not been accidentally engaged. If it has, simply pull it towards you and try starting the saw again. If the saw still won't start or your saw doesn't have an active chain brake, please make sure that the battery is fully charged and has been properly engaged in the saw prior to starting.


What is a pole saw?

Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.


How should I hold my pole saw?

Always hold the unit firmly with both hands. Keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For best balance when using a pole saw, do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you'll have the best control of the tool in unexpected situations. For further details, refer to your owner’s manual.


What safety precautions should be taken?

Only use pole saws for their intended purpose. Pole saws are great for pruning and trimming hard-to-reach branches. Think about where the branch being cut may fall—do not stand under the branch being cut. Try to keep the tree between yourself and the branch being trimmed (as a kind of shield from falling debris). Keep bystanders at least 50’ from the tree being worked-on. Always take your time. Start by removing long, heavy branches in stages, cutting off small sections to reduce the impact of any falling debris. Cut lower branches first so debris can fall more easily and not get stuck, causing a future hazard.


How thick of a branch can I cut?

Pole saws are typically used on branches less than 6” in diameter.


Can the pole saw be used for hedges?

Though the pole saw is capable of trimming hedges, a pole hedger would be more appropriate for the job and would leave a cleaner look.


Can you remove the poles and use this as a chainsaw?

No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you to remove the middle extension pole to shorten the unit by a few feet.


I know the handle cannot be removed, but can the pole saw be used on items near the ground?

Though not advised, this depends on the user's ability to maintain control at an awkward angle. The pole hedger trimmer is ideal for high level and hard to reach branches—it's not ergonomically suited for low cutting and extreme caution should be taken.


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.06ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 11.06ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 35.27ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
80V 20" Pole Hedge & 10" Pole Saw Combo w/ 2.0 Ah Battery & Charger
©2021 Greenworks Tools | All Rights Reserved