10.5 Amp Corded 14" Chainsaw

Out of stock
Model
20222
9 Amp 14-Inch Corded Chainsaw is rated 4.2 out of 5 by 6.
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_20222, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 13.42ms
  • REVIEWS, PRODUCT
  • 14" Oregon bar and chain, perfect for cutting branches and logs
  • Easy chain tensioning with quick tighten knob
  • Automatic oiler applies oil to the bar and chain to ensure durability and extend the life of the chain
  • Translucent oil tank for clear view of oil level
  • Greenworks Replacement Chain (2904802)
  • 3 Year Limited Warranty
$63.99
Out of stock

TEMPORARILY OUT OF STOCK

Be notified when item becomes available:

This 10.5 Amp corded chainsaw features an 14” bar and chain (.050 gauge, 52 drive links, 3/8” LP (low kickback chain), automatic oiler, cushioned overmold grip, tool-less chain tensioning. No gasoline, no pull cord, no spark plug, no maintenance! This chainsaw will serve your needs whether it is yard clean up, or storm clean up.

  • 14" Oregon bar and chain, perfect for cutting branches and logs
  • Easy chain tensioning with quick tighten knob
  • Automatic oiler applies oil to the bar and chain to ensure durability and extend the life of the chain
  • Translucent oil tank for clear view of oil level
  • Greenworks Replacement Chain (2904802)
  • 3 Year Limited Warranty
Power:
Corded
Brushless Motor:
No
Bar Length:
14 Inch
Bucking Spikes:
Metal
Auto Oiler:
Yes
Oil Tank:
Translucent
Trigger Speed:
Variable
Chain Tensioning:
Tool-less
Telescoping Shaft:
No
Tool Warranty:
3 Years
Battery Capacity:
-
  • (1) Corded Chainsaw
  • (1) Owner's Manual

Chainsaws & Pole Saws FAQS

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store—no specific brand name is required.


Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them, and the pole saws upright with the motor head at the top. During first use, users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.


How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.


What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thicker objects being cut.


How do I know if my chain is tensioned enough?

A correctly tensioned chain should only pull away from the bar enough to fit a dime (10¢) between the teeth and the bar. Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***


Can I use another brand of chain?

Yes. However, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside your owner’s manual.


What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.


Why isn’t my chain cutting?

If the wood is burning and/or smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times does not increase the cutting speed—this means the chain is worn.


Why does my chain keep falling off?

Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace the parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and causes the chain lean to one side.


Why isn’t my chainsaw turning on?

For chainsaws with an active chain brake, please ensure that it has not been accidentally engaged. If it has, simply pull it towards you and try starting the saw again. If the saw still won't start or your saw doesn't have an active chain brake, please make sure that the battery is fully charged and has been properly engaged in the saw prior to starting.


What is a pole saw?

Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.


How should I hold my pole saw?

Always hold the unit firmly with both hands. Keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For best balance when using a pole saw, do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you'll have the best control of the tool in unexpected situations. For further details, refer to your owner’s manual.


What safety precautions should be taken?

Only use pole saws for their intended purpose. Pole saws are great for pruning and trimming hard-to-reach branches. Think about where the branch being cut may fall—do not stand under the branch being cut. Try to keep the tree between yourself and the branch being trimmed (as a kind of shield from falling debris). Keep bystanders at least 50’ from the tree being worked-on. Always take your time. Start by removing long, heavy branches in stages, cutting off small sections to reduce the impact of any falling debris. Cut lower branches first so debris can fall more easily and not get stuck, causing a future hazard.


How thick of a branch can I cut?

Pole saws are typically used on branches less than 6” in diameter.


Can the pole saw be used for hedges?

Though the pole saw is capable of trimming hedges, a pole hedger would be more appropriate for the job and would leave a cleaner look.


Can you remove the poles and use this as a chainsaw?

No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you to remove the middle extension pole to shorten the unit by a few feet.


I know the handle cannot be removed, but can the pole saw be used on items near the ground?

Though not advised, this depends on the user's ability to maintain control at an awkward angle. The pole hedger trimmer is ideal for high level and hard to reach branches—it's not ergonomically suited for low cutting and extreme caution should be taken.


Rated 5 out of 5 by from Electric chainsaw This is one of the great tools available from Greenworks. So easy to use. I am an older female with back problems and this tool hit the mark!!!! Lightweight and easy to handle!!! Five ⭐️ Stars !!!!
Date published: 2022-05-28
Rated 5 out of 5 by from 14" Chainsaw I love this little chainsaw! It's so easy to use and I don't have to ask my dad to come tree's or limbs down! It runs well and I never have a hard time with it! I haven't had kick back or anything.
Date published: 2021-04-22
Rated 5 out of 5 by from Powerful chainsaw Used this to cut down limbs from a tree that fell behind my house onto my fence & shed. This chainsaw cut into branches that were 2” to 4”+ with no problems. Priming the oiling system took less than a minute. Look for vids on how to’s before use, they help. This chainsaw was worth every penny!
Date published: 2021-04-18
Rated 5 out of 5 by from Really A Tough Chainsaw I was tempted to by the Harbor F. electric chainsaw and bought the Greenworks instead. I can't say enough about it. I cut down A monster 3 foot diameter palm tree and cut the palm into small enough pieces to fit my garbage container. I abuse the saw and the motor has never over heated or failed.
Date published: 2019-01-03
Rated 4 out of 5 by from Great for my suburban needs I need to cut up some fallen trees in my backyard and cut some logs in half. This has more than enough power to get it done. It was easy to work with. Not a problem to disassemble and reassemble. I don't consider myself all that technically inclined and I easily figured it out. Cannot recommend more for suburban work.
Date published: 2022-05-02
Rated 1 out of 5 by from GreenWorks 20222 10.5 Amp 14-Inch Corded Chainsaw I've purchased several Grenworks lawn tools that I have been pleased with. But this chainsaw has leaked oil since I purchased it.
Date published: 2017-05-24
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_20222, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.37ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Electric chainsaw This is one of the great tools available from Greenworks. So easy to use. I am an older female with back problems and this tool hit the mark!!!! Lightweight and easy to handle!!! Five ⭐️ Stars !!!!
Date published: 2022-05-28
Rated 5 out of 5 by from 14" Chainsaw I love this little chainsaw! It's so easy to use and I don't have to ask my dad to come tree's or limbs down! It runs well and I never have a hard time with it! I haven't had kick back or anything.
Date published: 2021-04-22
Rated 5 out of 5 by from Powerful chainsaw Used this to cut down limbs from a tree that fell behind my house onto my fence & shed. This chainsaw cut into branches that were 2” to 4”+ with no problems. Priming the oiling system took less than a minute. Look for vids on how to’s before use, they help. This chainsaw was worth every penny!
Date published: 2021-04-18
Rated 5 out of 5 by from Really A Tough Chainsaw I was tempted to by the Harbor F. electric chainsaw and bought the Greenworks instead. I can't say enough about it. I cut down A monster 3 foot diameter palm tree and cut the palm into small enough pieces to fit my garbage container. I abuse the saw and the motor has never over heated or failed.
Date published: 2019-01-03
Rated 4 out of 5 by from Great for my suburban needs I need to cut up some fallen trees in my backyard and cut some logs in half. This has more than enough power to get it done. It was easy to work with. Not a problem to disassemble and reassemble. I don't consider myself all that technically inclined and I easily figured it out. Cannot recommend more for suburban work.
Date published: 2022-05-02
Rated 1 out of 5 by from GreenWorks 20222 10.5 Amp 14-Inch Corded Chainsaw I've purchased several Grenworks lawn tools that I have been pleased with. But this chainsaw has leaked oil since I purchased it.
Date published: 2017-05-24
  • y_2022, m_10, d_2, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_20222, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 9.37ms
  • REVIEWS, PRODUCT

What type of oil to use.

Asked by: Rossico
Hello Rossico, Any generic bar and chain oil can be used. Hope this helps!
Answered by: Greenworks Customer Care
Date published: 2022-09-02

I have just purchased the 14" corded chainsaw ... model 20222. Two questions : (1) can a bar tip guard be put on this unit ... if so what do you recommend ? (2) can a replace the 14" bar and chain with a 12" bar and chain ... if so what do you recommend

Asked by: mike845
Hello mike845, Thank you for your questions. We advise against the use of any non-OEM parts. Unfortunately, we do not manufacture a bar tip guard. Additionally, we do not recommend changing the size of the bar and chain. We're sorry for any inconvenience.
Answered by: Greenworks Support
Date published: 2022-07-04

My 20222 comes with a 52 link chain blade that has 17 total cutters, 8 left and 9 on the right (viewed from top). So at one point there are two right side cutters adjacent to each other with no left in between. Why wouldn't it cut to the right?.

Asked by: robandjeanne
I believe that this 20222 14 inch electric was shipped brand new with the wrong chain. Imho there is no way a chain blade with an unequal number of cutters could cut straight. This owner should receive the correct chain from Greenworks who may want to see this odd oem chain.
Answered by: robandjeanne
Date published: 2021-04-29

Is the chain 52 links such as Oregon 91VXL052G. (one answer said it was 45 links). If the chain cuts to the right is it likely the left side (as viewed from top) cutters need to take a bigger bite of wood either by sharpening or lowering the raker?

Asked by: robandjeanne
Hello, The chain specs are 3/8" LP, .050" Gauge, 52 Drive Links. A compatible chain is Oregon S52 or our chain, 2904802. Several things can make a chain cut crooked or pull to one side. The following are the causes and the remedies: - Uneven top plates can cause a chain to cut crooked. It's important to keep all top plates equal in length. - Dull cutters damaged by rocks can cause a chain to cut crooked. It's important to remove all damage from cutters prior to cutting. Cutting with a dull chain can accelerate wear to the bar and chain. - Different depth gauge settings from left to right. Keep all depth gauge settings equal from left to right. - Different top-plate angles from left to right. If you sharpen your chain at a 25º setting on your left hand, your right-hand cutters should match. - A worn guide bar. A badly worn bar cannot be repaired. If your system is cutting crooked and you have narrowed it down to the bar, more than likely the rails or the inside of the bar are damaged beyond repair.
Answered by: Greenworks Support
Date published: 2021-07-30

What’s the weight?

Asked by: Chob
Hello, This product weighs 7.92 lb (3.6 kg).
Answered by: Greenworks Support
Date published: 2021-07-30

Where can I find an owners manual for my 14" 10.5A Corded Chainsaw? Mine didn't come with one. Thanks.

Asked by: Maxwell
Hello Maxwell, We have selected manuals available online at this moment in time. Please send an email to info@greenworkstools.com and we can have manuals to your requested models sent.
Answered by: Greenworks Customer Care
Date published: 2021-07-10

Is 4-cycle engine oil suitable to chainsaw ? If not, what kind of oil is suitable ?

Asked by: Rayk
Hi RayK, We would not advise using engine oil for our units and recommend using any generic bar and chain oil.
Answered by: Greenworks Support
Date published: 2021-07-30

What size chain comes with is? I was reading a Q & A on Amazon and your tech. indicated that is was a 63 link, 3/8 pitch, .050 gauge chain - but when I googled Oregon (which your tech. suggests to do), they do not make a 63 link. Please clarify.

Asked by: Peej
Hello there, This chainsaw actually would have a 52 links, 3/8 pitch, .050 gauge chain. The Oregon chain to used would be an S52.
Answered by: Greenworks Support
Date published: 2021-04-17
  • y_2022, m_10, d_3, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_20222, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 8.14ms
  • QUESTIONS, PRODUCT
10.5 Amp Corded 14" Chainsaw
©2021 Greenworks Tools | All Rights Reserved