16" Replacement Chainsaw Chain With .043" Chain Gauge

In stock
Model
2904602
16-Inch Replacement Chainsaw Chain is rated 4.0 out of 5 by 23.
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_20
  • loc_en_US, sid_2904602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 7.61ms
  • REVIEWS, PRODUCT
$24.99
In stock
 
  • 16" Replacement Chainsaw Chain with .043" chain gauge for Greenworks chainsaws
Inch:
16
Chain Length:
16 Inch
Chain Material:
Steel
Chain Pitch:
3/8 Inch
Chain Gauge:
.043 Inch
  • (1) 16" Replacement Chainsaw Chain

Chainsaws & Pole Saws FAQS

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store—no specific brand name is required.


Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them, and the pole saws upright with the motor head at the top. During first use, users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.


How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.


What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thicker objects being cut.


How do I know if my chain is tensioned enough?

A correctly tensioned chain should only pull away from the bar enough to fit a dime (10¢) between the teeth and the bar. Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***


Can I use another brand of chain?

Yes. However, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside your owner’s manual.


What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.


Why isn’t my chain cutting?

If the wood is burning and/or smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times does not increase the cutting speed—this means the chain is worn.


Why does my chain keep falling off?

Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace the parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and causes the chain lean to one side.


Why isn’t my chainsaw turning on?

For chainsaws with an active chain brake, please ensure that it has not been accidentally engaged. If it has, simply pull it towards you and try starting the saw again. If the saw still won't start or your saw doesn't have an active chain brake, please make sure that the battery is fully charged and has been properly engaged in the saw prior to starting.


What is a pole saw?

Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.


How should I hold my pole saw?

Always hold the unit firmly with both hands. Keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For best balance when using a pole saw, do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you'll have the best control of the tool in unexpected situations. For further details, refer to your owner’s manual.


What safety precautions should be taken?

Only use pole saws for their intended purpose. Pole saws are great for pruning and trimming hard-to-reach branches. Think about where the branch being cut may fall—do not stand under the branch being cut. Try to keep the tree between yourself and the branch being trimmed (as a kind of shield from falling debris). Keep bystanders at least 50’ from the tree being worked-on. Always take your time. Start by removing long, heavy branches in stages, cutting off small sections to reduce the impact of any falling debris. Cut lower branches first so debris can fall more easily and not get stuck, causing a future hazard.


How thick of a branch can I cut?

Pole saws are typically used on branches less than 6” in diameter.


Can the pole saw be used for hedges?

Though the pole saw is capable of trimming hedges, a pole hedger would be more appropriate for the job and would leave a cleaner look.


Can you remove the poles and use this as a chainsaw?

No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you to remove the middle extension pole to shorten the unit by a few feet.


I know the handle cannot be removed, but can the pole saw be used on items near the ground?

Though not advised, this depends on the user's ability to maintain control at an awkward angle. The pole hedger trimmer is ideal for high level and hard to reach branches—it's not ergonomically suited for low cutting and extreme caution should be taken.


Rated 5 out of 5 by from Easy install replacement chainsaw chain My replacement chain arrived within a few days. Easy to understand instructions on You Tube via Google made it a snap to install within minutes. My 16" Greenworks chainsaw is working like a charm again.
Date published: 2022-09-25
Rated 5 out of 5 by from Chainsaw oiling? I don’t think it’s getting oiled. Does the oil cap need to be flipped open while it’s running?
Date published: 2022-09-20
Rated 5 out of 5 by from Chain Replacement Original chain was damaged by carelessness. Chain replacement came quickly and works perfectly.
Date published: 2022-09-12
Rated 5 out of 5 by from Great replacement chain This replacement chain for my 16 inch 60 volt chainsaw made it cut like brand new again.
Date published: 2022-06-04
Rated 5 out of 5 by from Great products I've owned several Greenworks products including a chainsaw for about five years. I purchased this new chain to remove a large pine tree that had died, from my property. The new chain made the job so much easier. I was able to cut up the entire tree into about one cord of firewood using two batteries without stopping to recharge them!
Date published: 2022-02-17
Rated 5 out of 5 by from 16" chainsaw Very impressed with the chainsaws cutting ability. It was side by side with my gas chainsaw with minimal noise and no exhaust fumes.
Date published: 2021-12-13
Rated 5 out of 5 by from New chain kissed my ash goodbye! Easy to install and works great!n. Small saw, big tree and still got the job done.
Date published: 2021-01-04
Rated 5 out of 5 by from Happy Exactly what I needed. Quick shipping, and right size the first time. Very satisfied, thank you. Don Moore
Date published: 2020-11-21
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_20
  • loc_en_US, sid_2904602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.57ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Easy install replacement chainsaw chain My replacement chain arrived within a few days. Easy to understand instructions on You Tube via Google made it a snap to install within minutes. My 16" Greenworks chainsaw is working like a charm again.
Date published: 2022-09-25
Rated 5 out of 5 by from Chainsaw oiling? I don’t think it’s getting oiled. Does the oil cap need to be flipped open while it’s running?
Date published: 2022-09-20
Rated 5 out of 5 by from Chain Replacement Original chain was damaged by carelessness. Chain replacement came quickly and works perfectly.
Date published: 2022-09-12
Rated 5 out of 5 by from Great replacement chain This replacement chain for my 16 inch 60 volt chainsaw made it cut like brand new again.
Date published: 2022-06-04
Rated 5 out of 5 by from Great products I've owned several Greenworks products including a chainsaw for about five years. I purchased this new chain to remove a large pine tree that had died, from my property. The new chain made the job so much easier. I was able to cut up the entire tree into about one cord of firewood using two batteries without stopping to recharge them!
Date published: 2022-02-17
Rated 5 out of 5 by from 16" chainsaw Very impressed with the chainsaws cutting ability. It was side by side with my gas chainsaw with minimal noise and no exhaust fumes.
Date published: 2021-12-13
Rated 5 out of 5 by from New chain kissed my ash goodbye! Easy to install and works great!n. Small saw, big tree and still got the job done.
Date published: 2021-01-04
Rated 5 out of 5 by from Happy Exactly what I needed. Quick shipping, and right size the first time. Very satisfied, thank you. Don Moore
Date published: 2020-11-21
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_3, tr_20
  • loc_en_US, sid_2904602, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.57ms
  • REVIEWS, PRODUCT

What chain do i deed for a 60v saw, model CS60L252?

Asked by: JoMc
Hello JoMc, This saw can be used with any chain that matches the specifications listed in the owner's manual. Guide bar length 16'' (406 mm) Chain pitch 3/8" LP (9.5 mm) Chain gauge .050" (1.27 mm) Drive links 56 That said, you may use our chain 2904402 (https://www.greenworkstools.com/16inch-replacement-chainsaw-chain-1) or find one in-store locally such as the Oregon brand compatible chain model S56.
Answered by: Greenworks Support
Date published: 2022-09-14

What is the chain for a Greenworks chainsaw CS60L02

Asked by: Veetkam
Hello Veetkam, Model CS60L02 requires a chain with the following specifications: Chain length: 16", Chain pitch LP 3/8" (9.5mm), Chain gauge: .050" (1.27 mm) and Drive links: 56. The compatible Greenworks chain model is 2904402 (https://www.greenworkstools.com/16in-replacement-chainsaw-chain). While currently out of stock, we should have it back soon. In the meantime, please know that this saw is compatible with any brand of the chain as long as it falls within the specifications listed above, such as the Oregon model S56 which can be purchased at most local hardware stores.
Answered by: Greenworks Support
Date published: 2022-08-29

Correct replacement chain for 80v 16-inch chainsaw model #CSB404?  Is there an Oregon option?

Asked by: Taylor1
Hello Taylor1, Model CSB404 requires a chain with the following specifications: Chain length: 16", Chain pitch LP 3/8" (9.5mm), Chain gauge: .050" (1.27 mm) and Drive links: 56. The compatible Greenworks chain model is 2904402 (https://www.greenworkstools.com/16in-replacement-chainsaw-chain). While currently out of stock, we should have it back soon. In the meantime, please know that this saw is compatible with any brand of the chain as long as it falls within the specifications listed above, such as the Oregon model S56 which can be purchased at most local hardware stores.
Answered by: Greenworks Support
Date published: 2022-04-25

I have a model cs60l252. What is the appropriate replacement chain for this saw.

Asked by: Rcook50
Hello Rcook50, Our chain model is 2904402, while currently out of stock, we hope to have it available soon! In the meantime, you may use the compatible Oregon chain part number S56.
Answered by: Greenworks Support
Date published: 2022-04-22

I have a CS80L01. I love the chainsaw but I just bought a chain on Amazon that said it was compatible with this model but it doesn’t fit well on the gear attached to the saw itself. It pops off easily. Any recommendations?

Asked by: Joe Mel
Hello Joe Mel, Model CS80L01 requires a chain with the following specifications: Chain length: 16", Chain pitch LP 3/8" (9.5mm), Chain gauge: .050" (1.27 mm) and Drive links: 56. The compatible Greenworks chain model is 2904402 (https://www.greenworkstools.com/16in-replacement-chainsaw-chain). While currently out of stock, we should have it back soon. In the meantime, please know that this saw is compatible with any brand of the chain as long as it falls within the specifications listed above, such as the Oregon model S56 which can be purchased at most local hardware stores.
Answered by: Greenworks Support
Date published: 2022-07-14

Hello, what is the correct replacement chain for model CS60L252. The saw was brand new but the chain slipped off during use and the gears tore the bottom of the chain up so it no longer fits down in the bar. Is there a replacement warranty or discount?

Asked by: JLuckett108
Hello JLuckett108, We're very sorry to hear about this issue. Please contact our Customer Care support at 1-888-909-6757 so that our team can appropriately assist you with this matter. We ask that you have access to the unit, battery, and charger at the time of your call so that we can complete troubleshooting and gather all necessary unit details.
Answered by: Greenworks Customer Care
Date published: 2022-04-19

Hello - I have the Greenworks pro 16" chainsaw. Model CS60L02. Which is the correct replacement chain? On the handle it says CL 15056, but I'm having a hard time finding that exact chain

Asked by: toadfarm
Hello toadfarm, Here is a link to the compatible bar and chain for CS60L02! https://www.greenworkstools.com/16inch-replacement-chainsaw-bar-and-chain-combo-195
Answered by: Greenworks Support
Date published: 2022-06-09

Friend borrowed my Model 20312 (uses a 0.043" gauge chain [model 2904602/Oregon R56]), and mistakenly replaced the chain with chain 29132 (a 0.050" gauge chain). He cut some wood while using the 29132 chain. Will it damage my saw to use that chain?

Asked by: Dawn986
Hello Dawn986, It is not likely that severe damage will occur from this. However, we would strongly advise using a chain that matches the original specifications listed for 20312. Specs: Chain pitch ................................ 3/8” (9.5 mm) Chain gauge ..............................0.043” (1.1 mm) Drive Links ................................56 DL
Answered by: Greenworks Support
Date published: 2022-02-23
  • y_2022, m_9, d_28, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_27
  • loc_en_US, sid_2904602, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 6.72ms
  • QUESTIONS, PRODUCT
16" Replacement Chainsaw Chain With .043" Chain Gauge
©2021 Greenworks Tools | All Rights Reserved