Universal High Pressure Soap Applicator

Out of stock
Model
51362
High Pressure Soap Applicator is rated 3.9 out of 5 by 14.
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_10
  • loc_en_US, sid_51362, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 46.58ms
  • REVIEWS, PRODUCT
  • Compatible with all Greenworks Pressure Washers
Special Price $22.49 Regular Price $29.99

SAVE 25% ($7.50)!

Out of stock

TEMPORARILY OUT OF STOCK

Be notified when item becomes available:

Product intro
The Greenworks High Pressure Soap Applicator is best suited for those looking to get the most out of their Greenworks electric pressure washers while washing vehicles, exterior siding and windows.
Key features
1.4 GPM maximum water flow
Max water temperature of 40 degrees
1/4" quick connection
Easy on and off dial keeps you in control
Universal fit – compatible with most pressure washers up to 3100 PSI
Compatible with all Greenworks Pressure Washers
Nozzle Material:
Plastic
Battery Capacity:
-
Max PSI:
3100
Quick Connect Size:
1/4 Inch
Max GPM:
1.4
Spray Pattern 1:
Soap

Pressure Washer FAQS

Does my water source have to be a certain PSI to run the unit properly?

Yes, the ideal input pressure is 60 PSI. However, the tolerance of the 60 PSI is 25% (unit tolerates 45-75PSI). If the inlet pressure is below 45 PSI, it will lead to a pressure drop and the machine will not pressurize properly. This often causes the unit to vibrate and sputter. Any higher than 75PSI and the unit may receive internal damage from too much pressure, breaching seals, triggering the thermal valve etc. If the unit does not have the correct PSI, it will not run correctly and the motor can be damaged.


What soap should I use with my pressure washer?

We recommend only using a designated pressure washer soap. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency.


Can I switch between applying soap and rinsing?

Yes, you can! For units with an onboard soap tank: Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line and then you'll have clean water. For units that use a soap bottle: To rinse, you'll have to remove the soap bottle and reattach the wand with the appropriate nozzle that you require for rinsing.


How do I winterize my pressure washer?

See the optimum winterizing procedure below: • Disconnect all water connections (garden hose). • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Use a pressure washer pump saver—follow instructions provided on pump saver. • Roll up the electrical cord and hose neatly, making sure there are no kinks. Ideally, we advise storing the machine and accessories in a room that does not reach freezing temperatures. Do not store near the furnace or other sources of heat as it may dry out the pump seals. Also note that this procedure requires using a pressure washer pump saver that can be purchased at most hardware stores.


Can I use hot water with your pressure washers?

No, we only offer cold water pressure washers. The maximum inlet water temperature should not exceed 104 °F (40 °C).


What size are the threaded fittings on the pressure washer?

All threaded connections on our pressure washers are an M22 14mm fitting.


What size are the nozzles?

Our pressure washers use ¼” quick connect nozzles.


My pressure washer will not start, or I have started the pressure washer, but it keeps shutting off after pulsating and does not reach high pressure. What’s wrong?

There are a few factors that could cause these reactions such as excess air in the pump or a clogged/faulty nozzle. See all troubleshooting options below. Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down. Additional components to check: • Ensure a nozzle is connected. Be sure to try all nozzles. • Ensure that the water source is fully opened and is at least 60PSI (Refer to: Does my water source have to be of a certain PSI to run the unit properly?) • Check that there is at least 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water from going into the unit and prevent proper pressure. • For best results, use a 1” (25 mm) or 5/8” (16 mm) garden hose. • Check that the water inlet is not clogged. Disconnect the garden hose, remove the filter and rinse with warm water. • Make sure you are using a working outlet. Be sure to try more than one!


Can I use a longer high-pressure hose?

Yes, you may use a longer high-pressure hose but please note that the pressure will drop.


Do you offer extension wands?

Unfortunately, we do not offer extension wands. While you may find something compatible with another brand, know that the pressure could be affected.


What uses are the different nozzles ideal for?

0° - Red nozzle: This nozzle is typically used for removing tough stains like rust and debris from concrete and metal. You can also use it for removing caked on mud from heavy construction, farm, or lawn equipment. Do not use this nozzle on wood or home siding or for washing a car because this stream is very powerful and can damage a soft surface. 15° – Yellow nozzle: The yellow pressure washer tip provides high versatility with its 15-degree angle tip. Referred to as the washing tip, it provides plenty of pressure to remove dirt from many surfaces without damage. This pressure washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip is versatile due to its wide area of cleaning and strong pressure application. 25° – Green nozzle: The green colored, 25-degree nozzle is best used to sweep away dirt and mud. Use it to sweep away leaves from decks, driveways, and sidewalks. It can also be used for removing light mildew stains, algae, and bacteria build up from pools. 40° – White nozzle: The white 40-degree tip, referred to as the “fan” tip, creates the widest area of cleaning with relatively low pressure. This pressure washer tip is best used for delicate cleaning applications. It's recommended for light cleaning on wood decks and other soft surfaces. 75° Soap – Black nozzle: The black colored nozzle is a low-pressure detergent nozzle. You use this when applying your preferred detergent for your cleaning projects. Turbo Nozzle: This nozzle rotates in a zero-to-15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches wide depending on the distance between the tip and the surface being cleaned.


Why isn’t my unit reaching high pressure?

Please check the following if your unit is not reaching high pressure: • You are using a 1” (25 mm) or 5/8” (16 mm) garden hose. • There are no kinks, leaks, or blockages at the inlet filter or in the garden or high-pressure hose. • The water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI). • A high-pressure nozzle is installed. • There is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit on.


Why won’t my pressure washer start?

Please be sure to go through the possible causes below: • Make sure the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit back on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up.


The soap is only coming out at low pressure. Why?

This is normal. Our units are designed to apply soap at low pressure. If a higher-pressure soap application is desired, we kindly refer you to our high-pressure soap bottle model 51362.


Why isn’t soap coming out?

For units with an onboard soap tank: • Ensure that the black soap nozzle is installed and unobstructed. Try blowing through it or use your nozzle cleaning tool to poke out any debris. • The detergent tube may be clogged or damaged. Try removing it and running some warm water through it to clean it and/or to identify damage. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. For units that use a soap bottle: • Make sure that soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the opening.


My nozzles are missing. Where can I find them?

Depending on the pressure washer you purchased, the nozzles can be found either stored directly on the body of the pressure washer, the front panel assembly, or in the gun handle. If the nozzles are missing, you will see empty holes with rubber gromets inside. If you have verified that they are missing, please contact us at 1-888-909-6757 (1-888-90WORKS). We're happy to help!


The pressure washer starts and then shuts off. Why?

If your pressure washer is experiencing this issue it can often be resolved with the below troubleshooting: Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down.


Rated 5 out of 5 by from Great improvement to soap dispenser I purchased this a month ago when the bottle to the original split. This dispenser is much better since it attaches to the wand and gives better coverage at greater distances. Well worth it
Date published: 2022-05-25
Rated 5 out of 5 by from Very efficient I bought this item to replace my former one. The ability to adjust the flow of the soap is a real plus. It has a dial on the side to adjust the amount of soap to be dispensed.
Date published: 2022-04-20
Rated 5 out of 5 by from awsome item. used the high presser soap disspinsor three time's and it has worked perfect all three times.
Date published: 2021-10-19
Rated 5 out of 5 by from Love the Green! Excellent quality. Doesn’t leak. Matches the power washer!
Date published: 2021-09-15
Rated 5 out of 5 by from Awesome I purchased this product from amazon. Just tried it for the first time and found that it provided plenty of foam. It turned my gray SUV completely white. Just make sure you use the proper soap and have the knob on high.
Date published: 2020-06-26
Rated 5 out of 5 by from Green works make a fantastic tool love using it!! Bought the 1600 power washer and this higj pressure soap tool. Love use both i usually wash the cars weekly or bi weekly. I usually add soap to the first lowest line and fill the rest with warm-hot water. The foaming suds are amazing. Great job Greenworks on this cost effective power washer and foam gun!! No regrets
Date published: 2018-04-19
Rated 3 out of 5 by from Not Great but works OK! I used it this morning to wash two cars. It soaps them up but not thick. I asked Greenworks the proper mixture which I now know is 10-1 mix. It's sad that the instructions say to fill the bottle with soap. If you do that it won't work!!! It would be nice if Greenworks recommended a car wash soap instead of replying that pressure wash soap is required. That will not foam up!!! I use it in the onboard tank of my Greenworks 2000psi pressure washer which mixes 20-1. Tried calling and emailing with I luck. Disappointed in the customer service. CAN ANYONE RECOMMEND A GOOD FOAMING CAR WASH SOAP?
Date published: 2021-05-07
Rated 2 out of 5 by from Water not getting through to Dispencer Pulled the sprayer out the other day to do some carpet cleaning. This would be my second time using the dispenser. First time was cleaning mildew off my boat, worked as expected. Now I get everything hooked up and pull the trigger, Nothing. I took the quick connect end off and found that the other end there is a rubber gasket and some other material . Looks like this is supposed to open when pressure is applied. It will not budge, even with a little persuasion. Got any suggestions on how to fix this? Rating would be a 5 except for the problems I have now
Date published: 2018-09-02
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_10
  • loc_en_US, sid_51362, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.52ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Great improvement to soap dispenser I purchased this a month ago when the bottle to the original split. This dispenser is much better since it attaches to the wand and gives better coverage at greater distances. Well worth it
Date published: 2022-05-25
Rated 5 out of 5 by from Very efficient I bought this item to replace my former one. The ability to adjust the flow of the soap is a real plus. It has a dial on the side to adjust the amount of soap to be dispensed.
Date published: 2022-04-20
Rated 5 out of 5 by from awsome item. used the high presser soap disspinsor three time's and it has worked perfect all three times.
Date published: 2021-10-19
Rated 5 out of 5 by from Love the Green! Excellent quality. Doesn’t leak. Matches the power washer!
Date published: 2021-09-15
Rated 5 out of 5 by from Awesome I purchased this product from amazon. Just tried it for the first time and found that it provided plenty of foam. It turned my gray SUV completely white. Just make sure you use the proper soap and have the knob on high.
Date published: 2020-06-26
Rated 5 out of 5 by from Green works make a fantastic tool love using it!! Bought the 1600 power washer and this higj pressure soap tool. Love use both i usually wash the cars weekly or bi weekly. I usually add soap to the first lowest line and fill the rest with warm-hot water. The foaming suds are amazing. Great job Greenworks on this cost effective power washer and foam gun!! No regrets
Date published: 2018-04-19
Rated 3 out of 5 by from Not Great but works OK! I used it this morning to wash two cars. It soaps them up but not thick. I asked Greenworks the proper mixture which I now know is 10-1 mix. It's sad that the instructions say to fill the bottle with soap. If you do that it won't work!!! It would be nice if Greenworks recommended a car wash soap instead of replying that pressure wash soap is required. That will not foam up!!! I use it in the onboard tank of my Greenworks 2000psi pressure washer which mixes 20-1. Tried calling and emailing with I luck. Disappointed in the customer service. CAN ANYONE RECOMMEND A GOOD FOAMING CAR WASH SOAP?
Date published: 2021-05-07
Rated 2 out of 5 by from Water not getting through to Dispencer Pulled the sprayer out the other day to do some carpet cleaning. This would be my second time using the dispenser. First time was cleaning mildew off my boat, worked as expected. Now I get everything hooked up and pull the trigger, Nothing. I took the quick connect end off and found that the other end there is a rubber gasket and some other material . Looks like this is supposed to open when pressure is applied. It will not budge, even with a little persuasion. Got any suggestions on how to fix this? Rating would be a 5 except for the problems I have now
Date published: 2018-09-02
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_4, tr_10
  • loc_en_US, sid_51362, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.52ms
  • REVIEWS, PRODUCT

Thinking of getting a foam cannon for rmy greenworks 2000 psi power washer. Can I use 30 Second Outdoor Cleaner in it? Used Washer w/water only on composite deck on house we bought & worked well, but  deck had  been uncared for & needs cleaner. 

Asked by: mich0620
Hello mich0620, We only recommend using a designated pressure washer soap. You can use any preferred brand of pressure washer soap, if it does not contain any harsh chemicals such as bleach, alkaline or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted; soap should be a watery consistency.
Answered by: Greenworks Support
Date published: 2022-06-09

When using the attachment it causes surges that does not happen without it on, if i continue to try it pressure washer quits working 

Asked by: Gcon33
Hello Gcon33, It sounds as though your nozzles may be clogged or there is some air trapped in the unit, these are common issues. With the following troubleshooting, this should be resolved! Please be sure to follow closely as these steps are not as effective when altered. 1) To clean the nozzles, soak all your nozzles in a half and half mixture of warm water and white vinegar. Soak all the nozzles for about an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles will now be free of any obstructions causing the unit to malfunction. 2) Purge any excess air from the pump. Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes – allowing the water to run through the unit at no pressure. In doing so, you are bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. If it is running, reinstall one of your clean nozzles and continue using the unit. 3) Ensure that the water source is fully opened and is at least 60PSI. 4) There should be 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water going into the unit and prevent proper pressure. If the issue does not resolve, please contact us at 1-888-909-6757 or submit an email to info@greenworkstools.com and include the headline "Help Request - Reviewer Response".
Answered by: Greenworks Customer Care
Date published: 2021-10-12

Can I order a replacement bottle for my foam cannon?

Asked by: Jacob77
Hello there, Unfortunately, the bottle does not come separately.
Answered by: Greenworks Support
Date published: 2021-09-14

With very light soap mixture, what is the maximum range for a 2000psi washer?

Asked by: Huygir
Hello Huygir, While capable of spraying up to 6', depending on the pressure of the washer being used. For best performance and coverage, we advise spraying from a distance of approximately 12-18 inches.
Answered by: Greenworks Support
Date published: 2021-08-02

I just received a Greenworks high pressure soap applicator but the instructions are vague. How much soap to water ratio is the correct mixture? Your instructions say to fill the detergent container with soap. How can that be right?

Asked by: Ebike Mike
Hello Ebike Mike, The soap to water mixture would be a recommendation from the pressure washer detergent bottle that you're using. Please refer to your detergent bottle for the dilution ratio. If no dilution is recommended this means it may have already been diluted. However, we do advise the consistency of the detergent to be the viscosity of water to allow for the best flow.
Answered by: Greenworks Support
Date published: 2021-08-08

How can a person be number 2 in Greenworks queue and have them call you back and not lose your place in line. It has been 7 hours and no callback. Do you only have one person in your call center? this happened yesterday also.

Asked by: kenorb
Hello there, We are terribly sorry to hear about this! If you have a question, please feel welcome to post it here. Should you require warranty assistance, you may also contact us via email at info@greenworkstools.com.
Answered by: Greenworks Support
Date published: 2022-06-08

Can this adjustable soap dispenser adjust the amount of soap/water mix and deliver a high pressure soap layer on the item being washed?

Asked by: Ricardo Blanco
The dilution is 10:1 regardless of the spray adjustment. The adjustment knob at the side only controls the spray angles.
Answered by: Greenworks Customer Care
Date published: 2021-07-07

Will it work with the 1500-PSI 13 AMP 1.2-GPM ELECTRIC PRESSURE WASHER Model 5100802

Asked by: vMeta
Hello vMeta, Yes, this will be compatible with your pressure washer. It can be used with all Greenworks pressure washer models up to 3100 PSI as it attaches to the end of the wand the same way that a nozzle would using a 1/4" quick connect fitting.
Answered by: Greenworks Support
Date published: 2021-08-16
  • y_2022, m_6, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_45
  • loc_en_US, sid_51362, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 11.69ms
  • QUESTIONS, PRODUCT
Universal High Pressure Soap Applicator
©2021 Greenworks Tools | All Rights Reserved