Replacement Spool Cover

In stock
Model
2910802
$9.99
In stock
60V Replacement Spool Cover is rated 2.4 out of 5 by 52.
  • y_2021, m_5, d_9, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_44
  • loc_en_US, sid_2910802, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 41.52ms
  • REVIEWS, PRODUCT
  • Replacement Spool Cover for Greenworks Pro 60V string trimmers
Line Feed:
Bump
  • (1) Replacement Spool Cover

QUESTIONS & ANSWERS

can I get a bump feed head for a greenworks 40 volts lithium max trimmer ? the head I have I have to push in a button and manually pull out the line, very frustrating !

Asked by: Johnny 58
Hello Johnny 58, We are concerned to read that you have had a less than a great experience with your string trimmer. Unfortunately, if you do have an auto-feed unit, it cannot be switched to bump. This unit should automatically feed out 1/4 inch of spool line every time the unit is stopped and then turned back on. Avoid letting the line get too short as this often causes the auto-feed to malfunction, so be sure to stop and start the trimmer often while in use. Here are a few other tips on what to check when the line will not feed properly: ensure there are no tangles in the line - if there are tangles try unwinding and rewinding the spool, ensure that you have enough line on the spool but that there is not too much line preventing the unit from feeding properly and finally ensure that the trimmer line has not become stuck or "welded" together. For further troubleshooting, please contact us at 1-888-909-6757 or send an email to info@greenworkstools.com.
Answered by: Greenworks Support
Date published: 2021-05-07

Will this fit an 80 volt pro?

Asked by: harv59
Hello harv59, Yes, it will but it depends on the model. A model number would allow us to better advise you.
Answered by: Greenworks Support
Date published: 2021-05-08

Will this work on my 60v dual feed 0.080 line trimmer model #ST60L01?

Asked by: Unicorn
Hello there, Yes, this spool cover will be compatible with your unit.
Answered by: Greenworks Support
Date published: 2021-05-07

Will this fit my Snapper ST60V trimmer?

Asked by: Vickster
Hello Vickster, Yes, it will fit.
Answered by: Greenworks Support
Date published: 2021-05-05

Will this fit a Snapper Model ST60V? Been on hold 3 days with y’all. Need answer please. 

Asked by: Vickster
Hello Vickster, Yes, it will fit.
Answered by: Greenworks Support
Date published: 2021-05-05

I need a whole replacement head for my 40V 10N trimmer model # 21302 spring an knob also. Where can I get that?

Asked by: Rah93
Hello Rah93, We would be happy to help with this but we do require some clarification of exactly which parts are needed. Our team wants nothing less than to be sure of how we direct you. Please contact us at 1-888-909-6757 or send an email to info@greenworkstools.com.
Answered by: Greenworks Support
Date published: 2021-05-04

Does this part # SUN-311091429, fit the Kobalt Model # KST 130X-06 ? I am trying to find 1 that will fit this 40v 13" cut path

Asked by: keithwkobalt
Hello keithwkobalt, Yes, this spool cover would be compatible.
Answered by: Greenworks Support
Date published: 2021-05-04

Will this spool cover fit my st60b01 ?

Asked by: Mikedking520
Hello Mikedking520, Yes, this spool cover would be compatible.
Answered by: Greenworks Support
Date published: 2021-05-04
  • y_2021, m_5, d_9, h_18CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_143
  • loc_en_US, sid_2910802, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 9.95ms
  • QUESTIONS, PRODUCT

CUSTOMER REVIEWS

Rated 5 out of 5 by from Fit perfectly I actually bought this for my Kobalt 40v weed eater as it is impossible to get a replacement spool cover for it and It fit perfectly, works great?
Date published: 2021-05-06
Rated 5 out of 5 by from Great Product It is what I needed. Shipping was fast. Great product.
Date published: 2021-04-23
Rated 5 out of 5 by from 5084557824 Out standing equipment have a blower and trimmer both work great and batteries last through out the job having a normal sized property two thumbs up for green works
Date published: 2021-01-18
Rated 5 out of 5 by from Perfect fit Nice replacement perfect fit for my 60v string trimmer
Date published: 2021-01-15
Rated 5 out of 5 by from As advertised. Delivery was quick, fit well, easy to replace. Used the unit several times over the past two weeks, works great.
Date published: 2020-07-10
Rated 4 out of 5 by from Very breakable, but replaceable. My spool cover broke after about 4 uses. It was hard to find replacements, but Lowe's online shop currently has them. I bought 3. Item 2910802 . You're welcome
Date published: 2020-08-14
Rated 4 out of 5 by from Love it - but so sad I bought my string trimmer by Greenworks over two years ago, and I got a solid over two years work out of it. I love the trimmer, it handled anything and everything I threw at it - until the spool cover broke. Now all I can do is wait for this piece to be in stock, because the trimmer doesn't work at all without the cover.
Date published: 2020-08-06
Rated 4 out of 5 by from Love my green works edger I have thick Augustine grass and this edger works well. I usually have 2 out of 4 charging lights left after doing my yard. My cover that goes over my spool, where the metal is has worn off. A lot of you have mentioned that this is out of stock online...I was frustrated too. I called and waited on hold for an hour and finally got through. The part was $3.00 to buy and $15 for shipping in Canadian $$ which will be cheaper when converted to US. I got 2 of them. So if you have the time, call and get yours directly from them. The shipping is a one time fee so order what you want. Should be here in 5-7 business days. I hope this helped. I hope to buy more green works products in the future.
Date published: 2020-05-27
  • y_2021, m_5, d_9, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_44
  • loc_en_US, sid_2910802, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.24ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Fit perfectly I actually bought this for my Kobalt 40v weed eater as it is impossible to get a replacement spool cover for it and It fit perfectly, works great?
Date published: 2021-05-06
Rated 5 out of 5 by from Great Product It is what I needed. Shipping was fast. Great product.
Date published: 2021-04-23
Rated 5 out of 5 by from 5084557824 Out standing equipment have a blower and trimmer both work great and batteries last through out the job having a normal sized property two thumbs up for green works
Date published: 2021-01-18
Rated 5 out of 5 by from Perfect fit Nice replacement perfect fit for my 60v string trimmer
Date published: 2021-01-15
Rated 5 out of 5 by from As advertised. Delivery was quick, fit well, easy to replace. Used the unit several times over the past two weeks, works great.
Date published: 2020-07-10
Rated 4 out of 5 by from Very breakable, but replaceable. My spool cover broke after about 4 uses. It was hard to find replacements, but Lowe's online shop currently has them. I bought 3. Item 2910802 . You're welcome
Date published: 2020-08-14
Rated 4 out of 5 by from Love it - but so sad I bought my string trimmer by Greenworks over two years ago, and I got a solid over two years work out of it. I love the trimmer, it handled anything and everything I threw at it - until the spool cover broke. Now all I can do is wait for this piece to be in stock, because the trimmer doesn't work at all without the cover.
Date published: 2020-08-06
Rated 4 out of 5 by from Love my green works edger I have thick Augustine grass and this edger works well. I usually have 2 out of 4 charging lights left after doing my yard. My cover that goes over my spool, where the metal is has worn off. A lot of you have mentioned that this is out of stock online...I was frustrated too. I called and waited on hold for an hour and finally got through. The part was $3.00 to buy and $15 for shipping in Canadian $$ which will be cheaper when converted to US. I got 2 of them. So if you have the time, call and get yours directly from them. The shipping is a one time fee so order what you want. Should be here in 5-7 business days. I hope this helped. I hope to buy more green works products in the future.
Date published: 2020-05-27
  • y_2021, m_5, d_9, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.15
  • cp_1, bvpage1
  • co_hasreviews, tv_8, tr_44
  • loc_en_US, sid_2910802, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 3.24ms
  • REVIEWS, PRODUCT
Replacement Spool Cover
©2021 Greenworks Tools | All Rights Reserved