18-Inch Replacement Chainsaw Chain

In stock
Model
2904202
18-Inch Replacement Chainsaw Chain is rated 4.1 out of 5 by 42.
  • y_2022, m_9, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_15, tr_27
  • loc_en_US, sid_2904202, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 10.44ms
  • REVIEWS, PRODUCT
$19.99
In stock
 
  • 18" Rreplacement Chainsaw Chain for Greenworks chainsaws
  • Chain Length:
    18 Inch
    Chain Material:
    Steel
    Chain Pitch:
    3/8 Inch
    Chain Gauge:
    .050 Inch
    • (1) 18" Replacement Chainsaw Chain

    Chainsaws & Pole Saws FAQS

    What oil do I use with my chainsaw?

    Our units use a standard bar and chain oil. You can purchase this from your local hardware store—no specific brand name is required.


    Why is my chainsaw leaking oil?

    All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them, and the pole saws upright with the motor head at the top. During first use, users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.


    How large of a branch/log can I cut?

    If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.


    What is the run time?

    The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thicker objects being cut.


    How do I know if my chain is tensioned enough?

    A correctly tensioned chain should only pull away from the bar enough to fit a dime (10¢) between the teeth and the bar. Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***


    Can I use another brand of chain?

    Yes. However, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside your owner’s manual.


    What file size do I use to sharpen the chain?

    Our chains may be sharpened using a 5/32” round file.


    Why isn’t my chain cutting?

    If the wood is burning and/or smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times does not increase the cutting speed—this means the chain is worn.


    Why does my chain keep falling off?

    Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace the parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and causes the chain lean to one side.


    Why isn’t my chainsaw turning on?

    For chainsaws with an active chain brake, please ensure that it has not been accidentally engaged. If it has, simply pull it towards you and try starting the saw again. If the saw still won't start or your saw doesn't have an active chain brake, please make sure that the battery is fully charged and has been properly engaged in the saw prior to starting.


    What is a pole saw?

    Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.


    How should I hold my pole saw?

    Always hold the unit firmly with both hands. Keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For best balance when using a pole saw, do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you'll have the best control of the tool in unexpected situations. For further details, refer to your owner’s manual.


    What safety precautions should be taken?

    Only use pole saws for their intended purpose. Pole saws are great for pruning and trimming hard-to-reach branches. Think about where the branch being cut may fall—do not stand under the branch being cut. Try to keep the tree between yourself and the branch being trimmed (as a kind of shield from falling debris). Keep bystanders at least 50’ from the tree being worked-on. Always take your time. Start by removing long, heavy branches in stages, cutting off small sections to reduce the impact of any falling debris. Cut lower branches first so debris can fall more easily and not get stuck, causing a future hazard.


    How thick of a branch can I cut?

    Pole saws are typically used on branches less than 6” in diameter.


    Can the pole saw be used for hedges?

    Though the pole saw is capable of trimming hedges, a pole hedger would be more appropriate for the job and would leave a cleaner look.


    Can you remove the poles and use this as a chainsaw?

    No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you to remove the middle extension pole to shorten the unit by a few feet.


    I know the handle cannot be removed, but can the pole saw be used on items near the ground?

    Though not advised, this depends on the user's ability to maintain control at an awkward angle. The pole hedger trimmer is ideal for high level and hard to reach branches—it's not ergonomically suited for low cutting and extreme caution should be taken.


    Rated 5 out of 5 by from No pulling Had to climb up a huge tree to cut a very large limb so glad i didnt have to pull a rope while in a awkward position thanks green works
    Date published: 2022-09-27
    Rated 5 out of 5 by from What a sharp chainsaw chain! The chain fit perfectly and all the teeth came out of the box razor-sharp. Hopefully I don't need to buy many more of these but if I do, I'll be buying them from Greenworks.
    Date published: 2022-09-23
    Rated 5 out of 5 by from 18 in replacement chain for electric chainsaw Ordered 2 replacement chains for 18 in Greenworks electric chain saw and recd in timely shipment and a great price. Best chaine saw I have ever used. Very nice to get replacement parts as needed and cost effective price.
    Date published: 2022-09-12
    Rated 5 out of 5 by from All possible compliments to GreenWorks !!! These are the best chains period, and trying to match the proper size and angle of sharpening etc with other brands I found to be a futile endeavor. I have three (3) of theses 80volt 18” chainsaws and exclusively purchase the stock GreenWorks chains for the past few years since learning my lesson. The pricing is very competitive and the longevity of the chain is comparable to the best I’ve ever had after 30+ years in the field. My best advise is to keep a couple of these New and on hand at all times and a couple you are rotating and keeping sharp. You’ll be ready for years to come!
    Date published: 2021-12-14
    Rated 5 out of 5 by from Replacement Chain An excellent chain that works better than expected. Would definitely buy another one (actually did).
    Date published: 2021-12-08
    Rated 5 out of 5 by from Great buy Fantastic 10 times better then any 42cc gas chainsaw I owned.
    Date published: 2021-12-04
    Rated 5 out of 5 by from Spare chain keeps you going Nothing worse than having to stop and resharpen a Chainsaw Chain, so having a second chain is a must for me. So I ordered the chain from Greenworks as I know it would fit and be sharp from the get go
    Date published: 2021-11-10
    Rated 5 out of 5 by from I like the chainsaw chain replacement I am quite pleased with the chainsaw chain product, including presentation, packaging, quality, and speed of delivery. Thank you for exemplary customer service.
    Date published: 2021-09-23
    • y_2022, m_9, d_28, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasreviews, tv_15, tr_27
    • loc_en_US, sid_2904202, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_greenworkstools
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 4.01ms
    • REVIEWS, PRODUCT
    Rated 5 out of 5 by from No pulling Had to climb up a huge tree to cut a very large limb so glad i didnt have to pull a rope while in a awkward position thanks green works
    Date published: 2022-09-27
    Rated 5 out of 5 by from What a sharp chainsaw chain! The chain fit perfectly and all the teeth came out of the box razor-sharp. Hopefully I don't need to buy many more of these but if I do, I'll be buying them from Greenworks.
    Date published: 2022-09-23
    Rated 5 out of 5 by from 18 in replacement chain for electric chainsaw Ordered 2 replacement chains for 18 in Greenworks electric chain saw and recd in timely shipment and a great price. Best chaine saw I have ever used. Very nice to get replacement parts as needed and cost effective price.
    Date published: 2022-09-12
    Rated 5 out of 5 by from All possible compliments to GreenWorks !!! These are the best chains period, and trying to match the proper size and angle of sharpening etc with other brands I found to be a futile endeavor. I have three (3) of theses 80volt 18” chainsaws and exclusively purchase the stock GreenWorks chains for the past few years since learning my lesson. The pricing is very competitive and the longevity of the chain is comparable to the best I’ve ever had after 30+ years in the field. My best advise is to keep a couple of these New and on hand at all times and a couple you are rotating and keeping sharp. You’ll be ready for years to come!
    Date published: 2021-12-14
    Rated 5 out of 5 by from Replacement Chain An excellent chain that works better than expected. Would definitely buy another one (actually did).
    Date published: 2021-12-08
    Rated 5 out of 5 by from Great buy Fantastic 10 times better then any 42cc gas chainsaw I owned.
    Date published: 2021-12-04
    Rated 5 out of 5 by from Spare chain keeps you going Nothing worse than having to stop and resharpen a Chainsaw Chain, so having a second chain is a must for me. So I ordered the chain from Greenworks as I know it would fit and be sharp from the get go
    Date published: 2021-11-10
    Rated 5 out of 5 by from I like the chainsaw chain replacement I am quite pleased with the chainsaw chain product, including presentation, packaging, quality, and speed of delivery. Thank you for exemplary customer service.
    Date published: 2021-09-23
    • y_2022, m_9, d_28, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasreviews, tv_15, tr_27
    • loc_en_US, sid_2904202, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_greenworkstools
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getReviews, 4.01ms
    • REVIEWS, PRODUCT

    How many drive links does the 18-inch Replacement Chainsaw Chain have?

    Asked by: RandyG67
    Hello RandyG67, Please see specs below. 18" Replacement Chain 3/8" LP .050"" Gauge 62 Drive Links
    Answered by: Greenworks Support
    Date published: 2022-09-07

    does this chain fit the CS60L574?

    Asked by: Ted B
    Hello, Thank you for your question. Unfortunately, we are having trouble locating a chainsaw with this model number. We kindly ask that you contact us for further assistance at 1-888-909-6757. Alternatively, you may view the specifications in your owner's manual and find a chain that has the same figures in terms of length, drive links, gauge and pitch.
    Answered by: Greenworks Support
    Date published: 2022-08-25

    Will this fit the GS180 chainsaw?

    Asked by: Greggy
    Hello Greggy, Yes, this chain would be compatible as they do have the same specifications. For commercial items, we do recommend contacting your local Greenworks Dealer for warranty inquiries, technical questions, or parts & service assistance.
    Answered by: Greenworks Support
    Date published: 2022-06-09

    Will this chain fit the Kobalt KCS 180B-06?

    Asked by: PittsburghKobalt
    Hello, Yes, this chain would be compatible!
    Answered by: Greenworks Support
    Date published: 2022-06-06

    Will this chain fit 18" 60V model CS60L4R3 (chain model is 91P062X)? I bought an Oregon chain with the same specs, but it doesn't match well enough to tighten properly.

    Asked by: Boiler77
    Hello Boiler77, Yes, this chain would be a compatible replacement for model CS60L4R3!
    Answered by: Greenworks Support
    Date published: 2022-03-10

    Please let me know what angle green works recommends using when sharpening the chain. For example 25 degrees, 30 degrees or 35 degrees. Thank you 

    Asked by: JCMitch
    Hello JCMitch, Here are the recommendations this information can also be found in the owner's manual. TOP PLATE FILING ANGLE: • CORRECT 30° – file holders are marked with guide marks to align file properly to produce correct top plate angle. • LESS THAN 30° – for cross cutting. • MORE THAN 30° – feathered edge dulls quickly. SIDE PLATE ANGLE: • Correct 80° – Produced automatically if you use the correct diameter file in the file holder. • Hook – “Grabs” and dulls quickly; increases the potential of kickback. Results from using a file with a diameter too small or a file held too low. • Backward Slope – Needs too much feed pressure; causes excessive wear to the bar and chain. Results from using a file with a diameter too large or file held too high.
    Answered by: Greenworks Customer Care
    Date published: 2022-06-12

    Is this chain the same as part # RB322041075? And will it fit on part # R0201599-00?

    Asked by: Shishkabob
    Hello Shishkabob, Yes, RB322041075 and this chain have the same specifications and would work with the bar, R0201599-00.
    Answered by: Greenworks Support
    Date published: 2022-09-02

    Does this chain work on the Pro 60V 18 inch, SKU 2015402?

    Asked by: Dbakley
    Hello Dbakley, Yes, this chain would be compatible!
    Answered by: Greenworks Support
    Date published: 2022-02-02
    • y_2022, m_9, d_28, h_21CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_33
    • loc_en_US, sid_2904202, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
    • clientName_greenworkstools
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 5.92ms
    • QUESTIONS, PRODUCT
    18-Inch Replacement Chainsaw Chain
    ©2021 Greenworks Tools | All Rights Reserved