NaN -Infinity

greenworkstools

80V 18" Cordless Battery Chainsaw & 10" Pole Saw Combo Kit w/ 4.0 Ah Battery & Rapid Charger

SKU 1343202-VK

MODEL# 1343202-VK

80V 18" Brushless Chainsaw ($399.99)
80V 10" Brushless Pole Saw ($199.99)
(1) 4.0Ah Battery
(1) Rapid Battery Charger
Compatible with 75+ Greenworks 80V Products

*Products may arrive in separated boxes

View more details

Product variants

$599.98

$599.98 ~~$599.98~~

View full details

$599.98

Details

80V 18" Brushless Chainsaw

Get the equivalent power of a 45cc gas engine without the hassle of gas and fumes. The Greenworks Pro 80V 18" Brushless Cordless Chainsaw starts easily and one 4.0 Ah battery charge can make up to 150 cuts through 4" x 4" pressure treated lumber. The Greenworks Pro 80V lineup features over 75 high-performance Pro 80V tools, allowing you to ditch your gas tools for an innovative, eco-friendly alternative.

Zero gas smell. Zero pull cords. Zero maintenance. Zero pollution breathed. Zero time wasted.

Key Features

Intelligent Brushless Motor Technology - 2x more torque, more power, longer runtimes, quiet operation, and extended motor life
18" bar and chain with steel bucking spikes and durable metal wrap around handle
Electronic chain brake for safe operation
Auto-oiler mechanism ensures the chain stays lubricated, and the oil level indicator window allows you to gauge oil usage
Side adjust chain tensioning for quick and easy adjustments

80V 10" Pole Saw

Our Greenworks 80V Cordless 10" Brushless Pole Saw is a safe and easy way to trim high branches & limbs without the use of a ladder. The brushless motor delivers more torque for a professional cutting experience. The Greenworks lineup features over 75 80V tools, allowing you to ditch your gas tools for an innovative, eco-friendly alternative.

Zero gas smell. Zero pull cords. Zero maintenance. Zero pollution breathed. Zero time wasted.

Key Features

10" Bar and Chain
Brushless motor provides more torque, quiet operation, and longer life
Manual chain tensioning (tool included)
More powerful than a 25CC Gas pole saw
8 Foot aluminum shaft

The No List

No Gas Smell.

No Emissions.

No Maintenance.

Low Noise.

Frequently Asked Questions

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required.

Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them and the pole saws upright with the motor head at the top.

During first use users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.

How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.

What is a pole saw?

Pole saws are basically stretched chainsaws with the controls and the motor head separated by a long pole. They tend to have shorter bars and chains than full size chainsaws and are primarily used for pruning and light lopping. Users should take basic, common safety precautions and follow proper operating procedure when using the units to avoid injury.

How should I hold my pole saw?

For best balance when using a pole saw do not overreach. Always keep proper footing and balance. Practicing proper footing and balance ensures that you will have proper control of the tool in unexpected situations. Always hold the unit firmly with both hands; keep your left hand on the pole shaft and your right hand on the rear handle, so your body is to the left of the chain line. Never use a left-handed (cross-handed) grip, or any stance that places your body or arm across the chain line. Ensure that you maintain a proper grip on the unit whenever the motor is running. For further details, refer to your owner’s manual.

Can the pole saw be used for hedges?

The pole saw would be capable of trimming hedges; however, a pole hedger would be more appropriate for the job and leave a cleaner look.

Can you remove the poles and use this as a chainsaw?

No. This unit cannot be converted between a pole saw and chainsaw. However, some models allow you the ability to remove the middle extension pole to shorten the unit by a few feet.

I know the handle cannot be removed but can the pole saw be used on items near the ground?

This would depend on the user's ability to maintain control in an awkward angle. The pole saw is designed for high level hard to reach branches. It is not ergonomically suited for low cutting and extreme caution should be taken.

Specifications