2000-PSI 14 Amp Electric Pressure Washer, 1.2-GPM

In stock
Model
5107402VT
2000-PSI 14 Amp 1.2-GPM Electric Pressure Washer is rated 3.9 out of 5 by 160.
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_147
  • loc_en_US, sid_5107402VT, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 40.2ms
  • REVIEWS, PRODUCT

Heavy-Duty Power For Every Job

  • 2000-PSI Pressure Washer with 14-amp Motor
  • 1.2 GPM (gallons per minute) flow at 2000-PSI
  • Perfect nozzle for every surface!
  • PWMA Certified
  • 3 Year Limited Tool Warranty
$199.99
In stock
 
Product Intro
Heavy-duty household cleaning requires tools as serious as you are. This powerful 2000 PSI pressure washer helps eliminate dirt and grime with its 14-amp motor that produces 1.2 GPM of exceptional cleaning power. An intuitive open-frame design with 10" wheels allows for easy maneuverability, and a kink-resistant 25-foot hose keeps every job within reach. This reliable unit comes with a metal wand, soap and turbo nozzles, an onboard soap tank, and multiple quick-connect wand tips for various cleaning applications. A PWMA-certified pressure washer, this model has guaranteed performance from a trusted source. PWMA (Pressure Washer Manufacturers' Association) was developed in 1997 to set standards for testing for pressure washers made for household, consumer, commercial, or farm use.
Key features
2000 Max PSI at 1.2 GPM water flow (1.2 GPM flow at 100 PSI)
PWMA Certified
25' kink-resistant hose - Superior resistance to kinking and abrasion
35' power cord - With inline GFCI for use on all exterior outlets
Open-frame design - 10" wheels for easy maneuverability
Onboard soap tank - With added accessory storage
Includes metal wand, soap and turbo nozzles, 25° and 40° quick-connect wand tips for various cleaning applications
3 Year Limited Tool Warranty
The No List
No Gas Smell. You no longer have to smell like gas after mowing
No Emissions. Save money and breathe clean air
No Maintenance. No tune-ups, no mixing fuels, no messy spills
Low Noise. Easy on the ear, low decibel pressure washing
Warranty + Service
3 Year Limited Tool
Certified by the Pressure Washer Manufacturers’ Association (PWMA)
Brushless Motor:
No
PSI:
2000
GPM:
1.2
Wheel Size:
10 Inches
Hose Length:
25 Feet
Cord Length:
35 feet
Onboard Tool Storage:
Yes
Soap Tanks:
Single On-Board
Motor Type:
Universal
Quick Connect Nozzles:
Yes
Spray Pattern 1:
0 Degree
Spray Pattern 2:
25 Degree
Spray Pattern 3:
40 Degree
Certifications:
PWMA
Warranty:
3 Year Limited
Battery Capacity:
-

Pressure Washer FAQS

Does my water source have to be a certain PSI to run the unit properly?

Yes, the ideal input pressure is 60 PSI. However, the tolerance of the 60 PSI is 25% (unit tolerates 45-75PSI). If the inlet pressure is below 45 PSI, it will lead to a pressure drop and the machine will not pressurize properly. This often causes the unit to vibrate and sputter. Any higher than 75PSI and the unit may receive internal damage from too much pressure, breaching seals, triggering the thermal valve etc. If the unit does not have the correct PSI, it will not run correctly and the motor can be damaged.


What soap should I use with my pressure washer?

We recommend only using a designated pressure washer soap. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency.


Can I switch between applying soap and rinsing?

Yes, you can! For units with an onboard soap tank: Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line and then you'll have clean water. For units that use a soap bottle: To rinse, you'll have to remove the soap bottle and reattach the wand with the appropriate nozzle that you require for rinsing.


How do I winterize my pressure washer?

See the optimum winterizing procedure below: • Disconnect all water connections (garden hose). • Turn on the machine for a few seconds until the remaining water in the pump exits. Turn off immediately. • Use a pressure washer pump saver—follow instructions provided on pump saver. • Roll up the electrical cord and hose neatly, making sure there are no kinks. Ideally, we advise storing the machine and accessories in a room that does not reach freezing temperatures. Do not store near the furnace or other sources of heat as it may dry out the pump seals. Also note that this procedure requires using a pressure washer pump saver that can be purchased at most hardware stores.


Can I use hot water with your pressure washers?

No, we only offer cold water pressure washers. The maximum inlet water temperature should not exceed 104 °F (40 °C).


What size are the threaded fittings on the pressure washer?

All threaded connections on our pressure washers are an M22 14mm fitting.


What size are the nozzles?

Our pressure washers use ¼” quick connect nozzles.


My pressure washer will not start, or I have started the pressure washer, but it keeps shutting off after pulsating and does not reach high pressure. What’s wrong?

There are a few factors that could cause these reactions such as excess air in the pump or a clogged/faulty nozzle. See all troubleshooting options below. Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down. Additional components to check: • Ensure a nozzle is connected. Be sure to try all nozzles. • Ensure that the water source is fully opened and is at least 60PSI (Refer to: Does my water source have to be of a certain PSI to run the unit properly?) • Check that there is at least 10' of unrestricted garden hose between the hose connection and the unit, any kinks will prevent the flow of water from going into the unit and prevent proper pressure. • For best results, use a 1” (25 mm) or 5/8” (16 mm) garden hose. • Check that the water inlet is not clogged. Disconnect the garden hose, remove the filter and rinse with warm water. • Make sure you are using a working outlet. Be sure to try more than one!


Can I use a longer high-pressure hose?

Yes, you may use a longer high-pressure hose but please note that the pressure will drop.


Do you offer extension wands?

Unfortunately, we do not offer extension wands. While you may find something compatible with another brand, know that the pressure could be affected.


What uses are the different nozzles ideal for?

0° - Red nozzle: This nozzle is typically used for removing tough stains like rust and debris from concrete and metal. You can also use it for removing caked on mud from heavy construction, farm, or lawn equipment. Do not use this nozzle on wood or home siding or for washing a car because this stream is very powerful and can damage a soft surface. 15° – Yellow nozzle: The yellow pressure washer tip provides high versatility with its 15-degree angle tip. Referred to as the washing tip, it provides plenty of pressure to remove dirt from many surfaces without damage. This pressure washer tip is designed for “sweeping” foliage or debris given its wide angle. This tip is versatile due to its wide area of cleaning and strong pressure application. 25° – Green nozzle: The green colored, 25-degree nozzle is best used to sweep away dirt and mud. Use it to sweep away leaves from decks, driveways, and sidewalks. It can also be used for removing light mildew stains, algae, and bacteria build up from pools. 40° – White nozzle: The white 40-degree tip, referred to as the “fan” tip, creates the widest area of cleaning with relatively low pressure. This pressure washer tip is best used for delicate cleaning applications. It's recommended for light cleaning on wood decks and other soft surfaces. 75° Soap – Black nozzle: The black colored nozzle is a low-pressure detergent nozzle. You use this when applying your preferred detergent for your cleaning projects. Turbo Nozzle: This nozzle rotates in a zero-to-15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover an area of 4 to 8 inches wide depending on the distance between the tip and the surface being cleaned.


Why isn’t my unit reaching high pressure?

Please check the following if your unit is not reaching high pressure: • You are using a 1” (25 mm) or 5/8” (16 mm) garden hose. • There are no kinks, leaks, or blockages at the inlet filter or in the garden or high-pressure hose. • The water supply has been fully opened and is ideally 60 PSI (unit tolerates 45-75PSI). • A high-pressure nozzle is installed. • There is no air in the pump. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit on.


Why won’t my pressure washer start?

Please be sure to go through the possible causes below: • Make sure the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release pressure then try turning the unit back on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up.


The soap is only coming out at low pressure. Why?

This is normal. Our units are designed to apply soap at low pressure. If a higher-pressure soap application is desired, we kindly refer you to our high-pressure soap bottle model 51362.


Why isn’t soap coming out?

For units with an onboard soap tank: • Ensure that the black soap nozzle is installed and unobstructed. Try blowing through it or use your nozzle cleaning tool to poke out any debris. • The detergent tube may be clogged or damaged. Try removing it and running some warm water through it to clean it and/or to identify damage. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. For units that use a soap bottle: • Make sure that soap bottle is securely attached to the end of the gun. • If the detergent is too thick, it will not pull through the assembly. You can use any preferred brand of pressure washer soap if it does not contain any harsh chemicals such as bleach, alkaline, or ammonia. Be sure to always follow the directions on the pressure washer soap for whether it needs to be diluted—soap should be a watery consistency. • Ensure that the soap bottle is free of debris that could be clogging the opening.


My nozzles are missing. Where can I find them?

Depending on the pressure washer you purchased, the nozzles can be found either stored directly on the body of the pressure washer, the front panel assembly, or in the gun handle. If the nozzles are missing, you will see empty holes with rubber gromets inside. If you have verified that they are missing, please contact us at 1-888-909-6757 (1-888-90WORKS). We're happy to help!


The pressure washer starts and then shuts off. Why?

If your pressure washer is experiencing this issue it can often be resolved with the below troubleshooting: Cleaning Obstructed Nozzles Over time with use, the pressure washer nozzles may collect dust, dirt, and calcium build-up which as a result cause the pressure washer to malfunction while in use. To clean nozzles, soak them in a 50/50 mixture of white vinegar and warm water for a minimum of 15 minutes. Then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Purge Air from Pressure Washer Set up the unit as per usual and ensure you are not using an extension cord. Remove any nozzle that may be connected at the end of the wand. Make sure that you have a green light on the GFCI on the power cord. Turn your garden hose on but leave the pressure washer turned OFF. With the pressure washer turned off, squeeze on the trigger for about 3 minutes, allowing the water to run through the unit at no pressure. In doing so, you're bleeding the unit out of any air that may be stuck in the pump. After 3 minutes, turn the unit on. Reinstall one of your clean nozzles and continue using the unit. At this stage, if the unit shuts off when a nozzle is installed be sure to try all nozzles. A faulty nozzle may cause the unit to shut down.


Rated 5 out of 5 by from Nice unit...Great support! I really like this little guy! And support was excellent! It developed an electrical issue and they're sending me a new unit out. I left them a call back number, 40 minutes later they were on the phone with me. Asked 4-5 questions about the problem, put me on hold for 3 minutes and then told me they'd send out a new unit. You can't beat that! As for the unit itself, I've got a 3k gas and this is just so much more convenient. Does a very good job of getting things clean (heavy eqipment / autos / cement floors), can't say it's much less effective than my gas 3K psi unit (a $1000 + HD industrial unit that I bought from a rental company). I honestly don't use the gas one anymore unless it's remote.
Date published: 2022-09-06
Rated 5 out of 5 by from Great machine for elderly people. I bought this on Costco. com 2years ago. But I just used it today, and it's manageable. Easy to use. Sorry, I don't have pictures.
Date published: 2022-09-06
Rated 5 out of 5 by from Great results, good value. I’ve never used a pressure washer, this was my first purchase and experience. I’m using it more than expected since it’s easy to use and the results are great. I’ve cleaned three decks and rails, a paver driveway, outdoor furniture and more. It arrived in a sturdy box, was easy to assemble and the instructions were good enough. Unfortunately the handle had a defective bolt for mounting the hose hook. Reaching customer service entailed a very long on-hold wait. Fortunately the rep I reached, Michael, was able to replace it and now I’m fully satisfied. I also have five Greenworks battery landscaping tools. I don’t hesitate to recommend their products to my friends.
Date published: 2022-08-15
Rated 5 out of 5 by from Great pressure washer Only used the pressure washer twice seams to perform great
Date published: 2022-07-30
Rated 5 out of 5 by from Value and Performance It is a powerful tool and cleans as good or better than a gas unit. Easy to operate, no fuss with gas or fumes. I have two of these, and bought one for son. You cannot go wrong!
Date published: 2022-07-26
Rated 5 out of 5 by from So versatile! I've found so many jobs for this machine beyond the deck cleaning that I bought it for. Great for cleaning cars as well.
Date published: 2022-07-03
Rated 5 out of 5 by from Clean Green! It so much more convenient than gas powered. What was I waiting for? This was long overdue.
Date published: 2022-06-29
Rated 5 out of 5 by from Nice portable pressure washer Perfect for medium to small jobs. Comes with 4 nozzles and a place in the handle to store them securely. Some assembly is required, but everything went together well. One minor issue is that the soap dispenser only works when the "soap" nozzle is on. It does not work with high pressure nozzle. Overall a good portable presure washer
Date published: 2022-06-27
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_147
  • loc_en_US, sid_5107402VT, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.75ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Nice unit...Great support! I really like this little guy! And support was excellent! It developed an electrical issue and they're sending me a new unit out. I left them a call back number, 40 minutes later they were on the phone with me. Asked 4-5 questions about the problem, put me on hold for 3 minutes and then told me they'd send out a new unit. You can't beat that! As for the unit itself, I've got a 3k gas and this is just so much more convenient. Does a very good job of getting things clean (heavy eqipment / autos / cement floors), can't say it's much less effective than my gas 3K psi unit (a $1000 + HD industrial unit that I bought from a rental company). I honestly don't use the gas one anymore unless it's remote.
Date published: 2022-09-06
Rated 5 out of 5 by from Great machine for elderly people. I bought this on Costco. com 2years ago. But I just used it today, and it's manageable. Easy to use. Sorry, I don't have pictures.
Date published: 2022-09-06
Rated 5 out of 5 by from Great results, good value. I’ve never used a pressure washer, this was my first purchase and experience. I’m using it more than expected since it’s easy to use and the results are great. I’ve cleaned three decks and rails, a paver driveway, outdoor furniture and more. It arrived in a sturdy box, was easy to assemble and the instructions were good enough. Unfortunately the handle had a defective bolt for mounting the hose hook. Reaching customer service entailed a very long on-hold wait. Fortunately the rep I reached, Michael, was able to replace it and now I’m fully satisfied. I also have five Greenworks battery landscaping tools. I don’t hesitate to recommend their products to my friends.
Date published: 2022-08-15
Rated 5 out of 5 by from Great pressure washer Only used the pressure washer twice seams to perform great
Date published: 2022-07-30
Rated 5 out of 5 by from Value and Performance It is a powerful tool and cleans as good or better than a gas unit. Easy to operate, no fuss with gas or fumes. I have two of these, and bought one for son. You cannot go wrong!
Date published: 2022-07-26
Rated 5 out of 5 by from So versatile! I've found so many jobs for this machine beyond the deck cleaning that I bought it for. Great for cleaning cars as well.
Date published: 2022-07-03
Rated 5 out of 5 by from Clean Green! It so much more convenient than gas powered. What was I waiting for? This was long overdue.
Date published: 2022-06-29
Rated 5 out of 5 by from Nice portable pressure washer Perfect for medium to small jobs. Comes with 4 nozzles and a place in the handle to store them securely. Some assembly is required, but everything went together well. One minor issue is that the soap dispenser only works when the "soap" nozzle is on. It does not work with high pressure nozzle. Overall a good portable presure washer
Date published: 2022-06-27
  • y_2022, m_9, d_28, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_13, tr_147
  • loc_en_US, sid_5107402VT, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 5.75ms
  • REVIEWS, PRODUCT

After a couple of uses the water inlet developed a leak. The leak has gotten worse with each use and now it is unusable because of the leak. Do you have any suggestions for fixing this leak?

Asked by: JStoy
Hello JStoy, It sounds as though the water inlet might need to be replaced. However, if there has been any damage done to the u-pin connection, this could be a greater issue. We would kindly suggest contacting us at 1-888-909-6757 and working with our experts on this matter so that we can be sure to assist you correctly!
Answered by: Greenworks Support
Date published: 2022-09-22

why does water continue to come out of nozzel when I release the handle

Asked by: Stevek
Hello Stevek, If your pressure washer is leaking at the gun, wand, or nozzle it could be that your accessories are not secured tightly enough. Turn off your machine and ensure everything is tightened properly. Should this suggestion not fix the issue, please contact Customer Care at 1-888-909-6757 (1-888-90WORKS) and we will be happy to assist with the warranty claims process.
Answered by: Greenworks Customer Care
Date published: 2022-08-15

I need to replace the outlet valve and the part doesn’t have a number in the exploded view of the manual. Could you just tell me the part number so I can order it?

Asked by: Feather
Hello Feather, The outlet connector goes by part number R0204067-00 and can be ordered through our helpline at 1-888-909-6757.
Answered by: Greenworks Support
Date published: 2022-08-12

Used my pressure washer twice and it does not work.

Asked by: Cuso
Hello Cuso, We're sorry to hear about your experience. Please be sure to go through the possible causes below. • That the outlet is supplying proper power to the unit. Be sure to check the electrical requirements of your pressure washer and ensure that the circuit can support it. For some of our more powerful units, they must be the only item on the circuit. • If using an extension cord, remove it and try connecting the unit directly to an appropriate outlet. • The pump has residual air pressure. Purge the unit by turning the machine off and pulling the gun trigger for a few minutes to release the pressure then try turning the unit on. • If there is residual friction among components the unit might emit a humming noise but not turn on. To resolve this, disconnect the water supply and turn the unit on for 2-3 seconds. Repeat this a few times or until the motor has successfully powered up. If issues persist, please feel welcome to contact us at 1-888-909-6757 (1-888-90WORKS) for further assistance.
Answered by: Greenworks Support
Date published: 2022-08-03

How does the soap come out

Asked by: Bigkelskels
Hello Bigkelskels, Soap can only be applied with the black soap nozzle, simply switch it out for the appropriate nozzle that you require for rinsing. Allow a few seconds for the soap suds to clear from the line, and then you will have clean water.
Answered by: Greenworks Support
Date published: 2022-07-20

What is capacity of each soap container

Asked by: StevePack
Hello StevePack, The soap container is approximately 2 liters.
Answered by: Greenworks Support
Date published: 2022-07-18

Which turbo jet head fix with this machine I can buy to replace the current one ?

Asked by: DNMIN
Hello DNMIN, Please see the turbo nozzle options below. https://www.greenworkstools.com/plastic-turbo-nozzle https://www.greenworkstools.com/4500-psi-turbo-nozzle
Answered by: Greenworks Support
Date published: 2022-07-18

does this washer use 1/4 accessory quick connections? I have accessories that I would like to use.

Asked by: CDWA
Hello CDWA, Yes, it does.
Answered by: Greenworks Support
Date published: 2022-07-04
  • y_2022, m_9, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_332
  • loc_en_US, sid_5107402VT, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 3.99ms
  • QUESTIONS, PRODUCT
2000-PSI 14 Amp Electric Pressure Washer, 1.2-GPM
©2021 Greenworks Tools | All Rights Reserved