40V 8" Brushless Edger

In stock
Model
2701402
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 4.36ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

Clean up those edges with perfect edging every time!

  • What's Included: One (1) 40V Battery (4.0 Ah) with battery charger
  • Runtime: Up to 60m. (w/ included battery)
  • Acreage: Up to 1/2 Acre
  • Power 60+ Tools with any Greenworks 40V Battery
$279.99
In stock
 
Clean up those edges with perfect edging every time!
Powerfully tough. The blade is forged with heavy-duty steel, ready to tackle any terrain. Add in algorithms and a brushless motor to reach unrivaled blade speed. Ka-pow!

Longer-lasting. Designed for longer runtimes with more torgue, quiet operation, and longer life.

Zero gas smell. Zero pull cords. Zero maintenance. Zero pollution breathed. Zero time wasted.

Key features
8-Inch Blade with curb wheel guarantees the perfect edging every time
Brushless motor delivers more power and torque to help cut through the thickest grass
Intelligent TRUBRUSHLESSTM Motor Technology - 2x more torque, more power, longer runtimes, quiet operation, and extended motor life
Tool-less depth adjustment allows added control over cutting depth
Guard and trail shield provides protection from debris
Battery Powers 60+ 40V Products - One battery to mow, blow, cut, trim, cultivate, and more!
The No List
No Gas Smell. You no longer have to smell like gas after mowing
No Emissions. Save money and breathe clean air
No Maintenance. No tune-ups, no mixing fuels, no messy spills
Low Noise. Easy on the ear, low decibel mowing
Warranty + Service
3 year tool limited warranty
3 year battery warranty
Dedicated Support 1-888-909-6757
Power 60+ Tools with any Greenworks 40V Battery
Brushless Motor:
Yes
Blade Length:
8 Inch
Cut Depth:
1.75 inch
Tool Warranty:
3 Years
Battery Warranty:
3 Years
Battery Capacity:
4.0 Ah
  • (1) 40V 8" Brushless Edger
  • (1) 4.0 Ah Battery
  • (1) Battery Charger
  • (1) Owner's Manual

String Trimmer FAQS

Why doesn’t my string trimmer turn on?

Battery operated string trimmer: Check that the battery has enough charge. Make sure to use a fully charged battery when starting your chores. Also, ensure the battery pack is installed and secured in the unit. If the battery is loose or can easily be removed it is not fully secured. A fully secured battery should have some resistance when pulled. Corded string trimmers: Use the guide inside the owner’s manual to ensure you have the correct extension cord required for operation. Check that the extension cords are in good working condition and make sure they are fully connected on both ends. If it still won't turn on, follow the start guide instructions that are located inside the owner’s manual.


How do I advance line?

Auto-feed string trimmers: To advance line, simply squeeze and release the trigger and repeat. Each time you start and stop the unit approximately ¼ inch of trimmer line will release. The more often you do this, the more line will advance. Bump and Feed string trimmers: While the unit is spinning, gently tap the bottom of the unit (knob) on the ground and the string trimmer will release approximately ¼ inch of line each time you tap it. The more often you do this, the more line will be released.


How do I clean my string trimmer?

To reduce yard debris build up on your string trimmer, do the following: • Wipe the machine after each use with a damp cloth dipped in water or neutral detergent. • Do not use aggressive detergents or solvents to clean the plastic parts or handles. • Keep the trimmer head free of grass, leaves, or excessive grease. • Keep the air vents clean and free of debris to avoid overheating and damage to the motor or battery. • Do not spray water onto the motor and electrical components.


Why does my unit stop when cutting grass?

Check the following if your unit suddenly stops cutting during use: • The guard is not on the unit. Ensure the guard is attached for each use. • The line is too heavy. Make sure you’re using the correct cutting line for your unit. Refer to the specification for the correct diameter of line that should be used with your string trimmer unit. • The motor is overloaded. Make sure that the cutting path (length of line outside of the trimmer head) is no more than the maximum cutting width of your unit. • The battery may be too warm. Allow it to cool and try again. Remove the battery from the unit and take it indoors to a cool/dry shaded location. Leave for 10 minutes, then try again once the the battery cools. • The battery pack may require charging or may not be properly installed.


Why isn’t my string trimmer cutting well?

Check that the guard is cleared of debris. Built up debris on the underside of the guard may prevent the line from cutting at its full potential. Ensure the cutting blade located on the underside of the guard is exposed, clean, and clear of debris. If the blade is dull, sharpen or replace the cutting blade. This will allow your trimmer line to work more effectively.


Edger FAQS

Why isn’t my edger turning on?

Battery operated edger: The battery capacity is low. Check the battery’s capacity by pushing the BCI button located on the front of the battery. Also, the connection from the unit to the battery may be loose or not properly secured. Check that battery is fully connected and seated inside the battery compartment. Corded edger: Refer to the owner’s manual to ensure you have the correct extension cord required for operation. Make sure the extension cord is in good working condition, then check that both ends of cords are fully connected. If necessary, test the cord on a similar Amp unit to ensure it can operate the string trimmer. Also, make sure to push the lockout button and trigger correctly: • Pull the lock-out-button and hold it. • Pull the trigger to start the machine. Refer to the instruction manual starting guide for further assistance.


Why did my edger stop?

Make sure the depth is not set too low. Adjust the depth as shown inside the instruction manual. If the edger starts to bog down, this is an indication that you’re moving too fast. Walk at a slow and steady pace to allow the blades to work more effectively.


Why does my edger not edge well?

To ensure the best edging results and a better appearance, do the following: • Edge when grass is dry. • Avoid edging in wet soil or wet grass. • Check the blade guard often and clear dirt and debris as needed.


How do I keep my unit clean?

To reduce yard debris build up on your edger, do the following: • Wipe the machine after each use with a damp cloth. • Do not use aggressive detergents or solvents to clean the plastic parts or handles. • Keep the trimmer head free of grass, leaves, or excessive grease. • Keep the air vents clean and free of debris to avoid overheating and damage to the motor or the battery. • Do not spray water on the motor and electrical components.


How do I store my unit?

• Prior to storage, clean and examine the machine for any damages. • Store the unit in a dry, covered, and cool location like a garage or shed. • Ensure that the unit is stored in a secure location that is not accessible to children or any other persons who should not be operating such machinery. • Remove the battery pack from the machine and store the battery in a cool and dry location. Refer to the owner’s manual for more information on battery storage.


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.35ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.35ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.3ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
40V 8" Brushless Edger
©2021 Greenworks Tools | All Rights Reserved