4500 PSI Turbo Nozzle
In stock
Model
5202302
4500 PSI Turbo Nozzle is rated
out of
5 by
4.
$39.99
In stock
- 4500 PSI Turbo Nozzle for pressure washers
- Compatible with most pressure washers up to 4500 PSI
- Compatible with all Greenworks pressure washers
Max PSI:
4500
Quick Connect Size:
1/4 Inch
Spray Pattern 1:
Turbo
Rated 5 out of
5
by
Anonymous from
Powerful
Excellent product, only bad thing is the delay, but other from that great
Date published: 2021-10-07
Rated 5 out of
5
by
Lucia from
It saved me!
I loaned my power washer to a friend and it was returned without the attachment that powers the water. Now I have the replacement and a fabulously clean deck.
Date published: 2020-06-25
Rated 4 out of
5
by
artie555 from
It Works Ok
I didn't realize that this was the wrong model for my 2000psi power washer until I got it and started using it. It works ok but it doesn't have the force to really get down to pushing or cleaning like the original nozzle. I should have ordered the Mode: l5201402..but by then the nozzle was already here. My mistake and I will soon correct it and purchase the right item for my model. Just wish the website listed the right one under replacement parts specific for the power washer within the description. This type of nozzle would work if you have a pressure washer above 2600psi.
Date published: 2019-05-18
Rated 5 out of
5
by
Anonymous from
Powerful
Excellent product, only bad thing is the delay, but other from that great
Date published: 2021-10-07
Rated 5 out of
5
by
Lucia from
It saved me!
I loaned my power washer to a friend and it was returned without the attachment that powers the water. Now I have the replacement and a fabulously clean deck.
Date published: 2020-06-25
Rated 4 out of
5
by
artie555 from
It Works Ok
I didn't realize that this was the wrong model for my 2000psi power washer until I got it and started using it. It works ok but it doesn't have the force to really get down to pushing or cleaning like the original nozzle. I should have ordered the Mode: l5201402..but by then the nozzle was already here. My mistake and I will soon correct it and purchase the right item for my model. Just wish the website listed the right one under replacement parts specific for the power washer within the description. This type of nozzle would work if you have a pressure washer above 2600psi.
Date published: 2019-05-18
Considering the purchase of one of your pressure washers. What model due you recommend for a homeowner with a 2-story house and general outside cleaning.
Hello Tommy F,
Thank you for your interest! It would depend on the level of power that you ultimately want and the jobs that you would like to be able to tackle. Units up to 1800PSI are for light-duty cleaning, 1900PSI - 2100 PSI are medium-duty, 2200-2500PSI are heavy-duty and finally, our super duty units are 2600 PSI and up! For second-story cleaning, you would likely require a second-story nozzle kit. While we do not manufacture them, you can purchase them from other brands as long as they use a 1/4" quick connect fitting.
Date published: 2021-07-12
Do you have the jump knob for weed eater 60v
Hello!
Please kindly reask this question while including the model number of the string trimmer. Alternatively, we can assist via email at info@greenworkstools.com or by phone at 1-888-909-6757.
Date published: 2021-06-28
Turbo nozzle gets stuck and does not spin. How can I fix this?
Hello tommmmm,
The spray tip could be clogged. Blow out or remove debris with your nozzle cleaning tool or a fine needle. Occasionally we suggest cleaning all nozzles by soaking all of your nozzles in a half and half mixture of warm water and white vinegar. Soak the nozzle for about 30 minutes to an hour and then proceed to poke your nozzle cleaning tool or paper clip through the end of the nozzle hole to poke out any debris. After you have done this, rinse them with warm water. Your nozzles should now be free of any obstructions!
Date published: 2021-07-13
Is this nozzle adjustable to change from pinpoint to spray. I don't know if I used the right terminology describing what I am looking for???? By the way I have the 2000 psi washer...
The nozzle rotates in a zero to 15-degree spray pattern in a circular motion to break down tough dirt and grime. The spray pattern can cover area of 4 to 8 inches wide, depending on a distance between the tip and the surface being cleaned.
Date published: 2021-04-25
What size turbo nozzle do I need for my GPW 1800 Greenworks pressure washer?
Hello Beth 502,
For model GPW1800 you can use either of our turbo nozzles including this one.
Date published: 2020-11-30
what size turbo nozzle will fit 1700psi 7.2 pm
Hello Rose,
Thank you for your question. While we do not manufacture 1700-PSI 7.2 pm the following 1700-PSI 1.2-GPM (5103902) includes a 40° quick connect tip and turbo nozzle. If this is the correct unit, the following turbo nozzle can be purchased for this unit.
https://www.greenworkstools.com/4500-psi-turbo-nozzle
https://www.lowes.com/pd/Greenworks-Test-Plastic-Turbo-Nozzle/1002724080
Date published: 2020-09-28
HAVE A 3100PSI MODEL 5201802 UPC 841821018528 1.10x1.10x3.80 will nozzle will 4500 psi fix on washer
Hello squeaky,
Yes, as long as your unit is under 4500 P.S.I and can take 1/4 quick connect attachments. If you used the
5201802 item prior this one can be used in place.
Date published: 2020-09-23
What orifice size?
Hello jimD
3.0 orifice
Date published: 2020-08-12
