Pro 80V 10" Brushless Cultivator / Tiller (Tool Only)

In stock
Model
2800002VT
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getAggregateRating, 40.71ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
  • Tool only, battery & charger sold separately
  • 4 Year Limited Tool Warranty
$249.99
In stock
 

The Greenworks lineup features over 20 high-performance Pro 80V tools, allowing you to ditch your gas tools for an innovative, eco-friendly alternative.

  • Brushless motor for more torque, quiet operation, and longer life
  • Hassle free push button start
  • Features four forward rotating, removable and adjustable steel tines with a 10" tilling width and a 5" tilling depth
  • Tool only, battery & charger sold separately
  • 4 Year Limited Tool Warranty
Power:
Cordless
Voltage:
80V
Brushless Motor:
Yes
Tilling Width:
10 Inches
Tilling Depth:
5 Inches
Foldable Handle:
No
Tool Warranty:
4 Years
Battery Capacity:
-
Battery Chemistry:
Li-Ion
  • (1) Pro 80V Cordless 10" Brushless Tiller (Tool Only)

Tiller FAQS

Would this tiller cut through small mesh-like roots under a tree? I’ve been told light weight tillers like this only bounce along on rough ground.

Though it should be able to tear up small roots, this unit is not designed for tree roots. We advise that you avoid roots and rocks when using this tiller.


How deep it will dig into topsoil?

Depending on soil conditions, this tiller will go down to a depth of 5 inches. Make sure to remove rocks and roots before cultivating to prevent damage to the tiller.


Do the Tines rotate backward?

No, the tines do not rotate backwards.


Can I use my Tiller to remove weeds?

Though you certainly can, removing weeds with a tiller is generally not recommended. While it makes the job a lot faster, it can also spread the seeds underground, ensuring the quick return of weeds into your garden.


What is the best/ideal season to use my tiller?

Autumn and spring are the most favorable seasons to use your tiller. Avoid using it if the land is too soggy as this could result in compact clods when the soil dries. For best results, wait a day or two after it rains until the soil is semi-dry.


Can the Tiller break up small twigs and branches?

It should be able to handle small twigs under 1 inch in diameter, but it's designed to cultivate soil for small gardening projects like flower beds.


Can it cut through tree root?

No, it will not cut through tree root. Tree roots should be avoided when operating this unit as it will cause damage.


Can I use my Tiller as an Edger? Can I remove the Tines and use as an Edger?

Though you certainly could, we don't recommend it. Even when reducing the number of tines, using a tiller as an edger isn't ideal because the tines are designed specifically to dig into soil rather than to cut blades of grass. You can remove the tines to till smaller areas but it wouldn't make it suitable for edging.


Can it be left out in the rain?

No, this is an electric tool that can't be left out in the rain. It is advised to store this unit in an upright position in a clean, dry place.


Are the tines bent?

Yes, the tines are bent to help further cultivate the soil while in use.


How do you lubricate the gear box and what type of lubricant do you use?

The gearbox is full of synthetic transmission grease and should never really need to be replaced. However, if you wish to change out the grease, you'll need to remove the gearbox from the unit (4 bolts at the connection point). This will leave the transmission exposed and then lubricant can be added by hand.


Why does my motor fail to start when switch trigger is depressed?

Press in and hold the switch safety lock out button and then pull back on the bale. If the unit still won't start, please refer to the following: Battery operated: Usually this means that the battery hasn’t been fully inserted. On both the charger and the unit, you'll know the battery is properly secured when you hear an audible click—sometimes it requires a good push. If the battery is loose or can easily be removed it does not have a complete and secure connection. Corded: Make sure you're using the correct sized extension cord by following the guide inside the owner’s manual. Check that the extension cord is not loose when inserted into the mower’s plug and ensure a secure connection to a live 120V AC, 60 HZ AC receptacle. *Always refer to your owner’s manual for proper starting instructions.*


Can the tiller be used without the wheels attached?

Yes, the tiller can be used without the wheels to achieve a greater tilling depth. However, it will make the unit much harder to maneuver.


Can I use my tiller on hard soil or clay?

We wouldn't recommend using this unit on hard soil or clay. This tiller is designed for cultivating soft soil in your flower bed and other light to medium jobs.


Is the tilling depth adjustable?

Yes! You can adjust the depth of the tiller by changing the level of the wheel shaft or by removing the wheels all together.


How to install tines?

*Make sure the battery has been removed from the unit before beginning installation.* 1. Lean the unit back on its wheels so that the handlebar rests on the ground. 2. Place tine C on the tine shaft to the left of the gear box. The stamped side of the tine should face away from the gear box. 3. Place tine B on the tine shaft to the right of the gearbox. The stamped side of the tine should face away from the gear box. 4. Place a felt washer on each side of the tine shaft and slide to rest against the inner tines. 5. Place outer tine D on the left side of the tine shaft. The stamped side should face in toward tine C. 6. Place outer tine A on the right side of the tine shaft. The stamped side should face in toward tine B. NOTE: When installed correctly, the angled edge of the tine blades should face the ground. To secure the tines to the tine shaft, insert the hitch pin into the holes located on either side of the tine shaft. NOTE: The unit will not operate properly if the tines are installed incorrectly. If you notice a problem with the cultivating operation of the unit, check for proper tine positioning. NOTE: Installation is from the front of the cultivator.


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.91ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.91ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned; HTTP status code of 404 was returned;

I already have a 80V greenworks lawn mower with 80V batteries. Will my 80V batteries fit this tiller?

Asked by: nissan05
Hello nissan05, Yes, this tiller can be used with any of our 80V battery models!
Answered by: Greenworks Customer Care
Date published: 2022-09-26

Menards has no supply issue Rebranded Greenworks and you all cant get the item in stock after 5 months ? https://www.menards.com/main/outdoors/outdoor-power-equipment/augers-tillers-compactors/masterforce-reg-

Asked by: Joe Momma
Hello, We apologize for any inconvenience, however, we have not yet received this item. Please note that the 80V Masterforce products at Menards can be used with our 80V battery models! If you are in immediate need of this product, this would be a great option.
Answered by: Greenworks Support
Date published: 2022-09-19

Have been waiting months for this product ---it's now August---will I be able to take advantage of customer appreciation 20 year anniversary and the 20% discount when it does come in??? I'm ready to order today or anytime with the discount. Thanks

Asked by: OSUDOC72
Hello OSUDOC72, While we do not have a finalized ETA, please know that our team is working diligently to replenish the stock as soon as possible for our valued customers. We would have like for this time to be available during our 20th year anniversary our apologies for any inconvenienced this news may have cause. In the meantime, you may enter your email into the appropriate field on the page so that you can be notified as soon as the stock has been replenished. Please feel welcome to follow us on social media for updates on new units, upcoming sales, and promotions: https://www.instagram.com/greenworkstools https://twitter.com/GreenworksTools https://www.facebook.com/greenworkstools
Answered by: Greenworks Customer Care
Date published: 2022-08-08

Since this tool has been on back order/not in stock for months on end now, am I going to be able to use a special coupon code for the “customer application 20th Anniversary” sale (20%off)? The Spring has sprung, and now it is half way through Summer.

Asked by: B Mathews
Hello B Mathews, We truly appreciate your interest. Unfortunately, we have experienced supply chain issues that have prevented some items from coming in on time. We hope to have this available soon. However, we do not have a finalized ETA. We are sorry for any inconvenience. Unfortunately, this sale would not be valid at that time. Sales and promotions on GreenworksTools.com run weekly from Thursday morning to the following Thursday morning. We invite you to follow us on social media for updates on new products and promotions: https://www.instagram.com/greenworkstools https://twitter.com/GreenworksTools https://www.facebook.com/greenworkstools
Answered by: Greenworks Support
Date published: 2022-08-08

I've been waiting 6 months when will it be in stock? I already have batteries and charger.

Asked by: Kuts
Hello Kuts, We are expecting a shipment of this product in August.
Answered by: Greenworks Support
Date published: 2022-08-02

What is the weight of the tool with battery?

Asked by: john1972
Hello John1972, The tool on its own weighs 29.3 lb. (13.3 kg). Please note that a battery is not included with this kit. The weight will vary depending on the battery in use. Our 80V batteries range between 3 and 6 lbs.
Answered by: Greenworks Support
Date published: 2022-06-06
  • y_2022, m_10, d_2, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_2800002VT, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_greenworkstools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 8.72ms
  • QUESTIONS, PRODUCT
Pro 80V 10" Brushless Cultivator / Tiller (Tool Only)
©2021 Greenworks Tools | All Rights Reserved