Pro 80V Brushless 16" String Trimmer w/ 2.0 Ah Battery (Attachment Capable)
- Includes 80V 2.0 Ah Lithium-Ion Battery & Charger
- Up to 45 minutes of runtime with a 2 Ah Battery
- Included 80V battery powers over 50 Greenworks 80V tools
TEMPORARILY OUT OF STOCK
Be notified when item becomes available:
|Experience the next generation of power|
|Greenworks Pro 80V 24-Inch Hedge Trimmer Features a Brushless Motor, 24-Inch Dual Action Blades, and Rotating Rear Handle. When it comes to outdoor power equipment, you put the emphasis on “power.” And why not? For homeowners like you who take on jobs big or small, you need heavy grade construction and long-lasting peak performance. The Greenworks Pro 80V family of tools meet the challenge with a universal battery system that works across multiple products, high-efficiency motors, and innovative smart technology. All Greenworks Pro 80V tools feature a 4 Year Limited Tool & Battery Warranty.|
|Wide 16" cut path with a .080" dual line bump feed head rips through weeds in your yard|
|Brushless motor for more torque, quiet operation, and longer life|
|Digital Hi/Lo Variable Speed trigger for precise control over cutting power|
|Attachment capable design accepts attachments from multiple brands|
|Top mounted motor with aluminum straight shaft allows for superior balance and ergonomics while trimming|
|4 Year Limited Tool & Battery Warranty|
*Run-time varies based on grass condition and operator technique
- (1) 16" Cordless Attachment Capable String Trimmer
- (1) 80V Lithium-Ion Battery
- (1) Battery Charger
- (1) 0.080" Spool Assembly
String Trimmer FAQS
Why doesn’t my string trimmer turn on?
Battery operated string trimmer: Check that the battery has enough charge. Make sure to use a fully charged battery when starting your chores. Also, ensure the battery pack is installed and secured in the unit. If the battery is loose or can easily be removed it is not fully secured. A fully secured battery should have some resistance when pulled. Corded string trimmers: Use the guide inside the owner’s manual to ensure you have the correct extension cord required for operation. Check that the extension cords are in good working condition and make sure they are fully connected on both ends. If it still won't turn on, follow the start guide instructions that are located inside the owner’s manual.
How do I advance line?
Auto-feed string trimmers: To advance line, simply squeeze and release the trigger and repeat. Each time you start and stop the unit approximately ¼ inch of trimmer line will release. The more often you do this, the more line will advance. Bump and Feed string trimmers: While the unit is spinning, gently tap the bottom of the unit (knob) on the ground and the string trimmer will release approximately ¼ inch of line each time you tap it. The more often you do this, the more line will be released.
How do I clean my string trimmer?
To reduce yard debris build up on your string trimmer, do the following: • Wipe the machine after each use with a damp cloth dipped in water or neutral detergent. • Do not use aggressive detergents or solvents to clean the plastic parts or handles. • Keep the trimmer head free of grass, leaves, or excessive grease. • Keep the air vents clean and free of debris to avoid overheating and damage to the motor or battery. • Do not spray water onto the motor and electrical components.
Why does my unit stop when cutting grass?
Check the following if your unit suddenly stops cutting during use: • The guard is not on the unit. Ensure the guard is attached for each use. • The line is too heavy. Make sure you’re using the correct cutting line for your unit. Refer to the specification for the correct diameter of line that should be used with your string trimmer unit. • The motor is overloaded. Make sure that the cutting path (length of line outside of the trimmer head) is no more than the maximum cutting width of your unit. • The battery may be too warm. Allow it to cool and try again. Remove the battery from the unit and take it indoors to a cool/dry shaded location. Leave for 10 minutes, then try again once the the battery cools. • The battery pack may require charging or may not be properly installed.
Why isn’t my string trimmer cutting well?
Check that the guard is cleared of debris. Built up debris on the underside of the guard may prevent the line from cutting at its full potential. Ensure the cutting blade located on the underside of the guard is exposed, clean, and clear of debris. If the blade is dull, sharpen or replace the cutting blade. This will allow your trimmer line to work more effectively.