Close

Click image to zoom
80V 18" Cordless Battery Chainsaw w/ Two Extra Chains (Tool-Only)
Product Images







Details
Cut, trim, and clean up trees and shrubs!
Our Greenworks 18" Chainsaw features a high-efficiency 80V brushless motor with electric start which provides more power, torque, and longer life without the hassle of gas. Equipped with 18" bar and chain for dependable performance. Automatic oiler easily applies oil to the chain keeping it lubricated. Mechanical chain brake halts the chain movement to prevent accidental kick back. This chainsaw is compatible with the Greenworks 80V system of 75+ tools and batteries and is backed by a 4-year warranty.
Zero gas smell. Zero pull cords. Zero maintenance. Zero pollution breathed. Zero time wasted.
Key features
- 18" Bar and Chain w/ 66 FPS
- Intelligent Brushless Motor Technology - 2x more torque, more power, longer runtimes, quiet operation, and extended motor life
- Automatic oiler
- Mechanical Chain break
- Steel Bucking spikes
Durable wrap around handle
The No List
No Gas Smell.
No Emissions.
No Maintenance.
Low Noise.
Frequently Asked Questions


What oil do I use with my chainsaw?
Why is my chainsaw leaking oil?
All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, the chainsaws flat with a rag beneath them and the pole saws upright with the motor head at the top.
During first use users should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.
How large of a branch/log can I cut?
What is the run time?
How do I know if my chain is tensioned enough?
Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime (10c) between the teeth and the bar.
***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN IS TENSIONED WHEN HOT, THEN ALLOWED TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***
Can I use another brand of chain?
What file size do I use to sharpen the chain?
Why isn’t my chain cutting?
If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced.
Replace the chain if:
• The length of the cutting edges is less than 5 mm.
• There is too much space between the drive links and the rivets.
• The cut speed is slow
• Sharpening the chain many times but it does not increase the cutting speed. The chain is worn.
Owner's Manual


How to Videos


Warranty


Warranty + Service
4 year tool limited warranty
4 year battery warranty
Dedicated Support 1-888-909-6757
Power 75+ Tools with any Greenworks 80V Battery