48V (24V x 2) 16" Cordless Battery Chainsaw w/ Two (2) 4.0Ah USB Batteries & Dual Port Charger

Video

48V (24V x 2) 16" Cordless Battery Chainsaw w/ Two (2) 4.0Ah USB Batteries & Dual Port Charger

SKU 2018002 | MODEL# CS48L4411

$ 224 .99 ~~$29999~~

SAVE $75.00 (25%)

Earn loyalty points

48V (24V x 2) - Two 24V batteries combine for 48-volts of pure power*

Includes two 4.0 Ah batteries and charger
Up to 150 cuts on 4x4 lumber with included batteries
Included 24V Battery powers 200+ Greenworks 24V tools
*requires two 24V batteries to operate

Quantity

Get it by: Updating delivery times and availability...

Change Best Buy Store

Availability based on local stock and may change. Order before 4pm eligible for same day where available.

More near your

Showing in-stock stores within 100 miles

Select an option:

14" (2x4.0Ah) 16" (2x4.0Ah)

48V (24V x 2) 16" Cordless Battery Chainsaw w/ Two (2) 4.0Ah USB Batteries & Dual Port Charger

$ 224 .99 ~~$29999~~

SAVE $75.00 (25%)

Earn loyalty points

Specifications & Guides Find specifications as well as additional supporting information about our product

Product Specifications

Auto Oiler	Yes
Bar Length	16 Inch
Battery Warranty	3 Years
Brushless Motor	Yes
Chain Brake	Electronic
Chain Gauge	.043 Inch
Chain Pitch	3/8 Inch
Drive Links	56
Chain Tensioning	Manual
Cutting Capacity	Up to 30 Inches
Oil Tank	Translucent
Start Type	Push Button
Tele Shaft	No

Loading title...

Owner's Manual

48V (24V x 2) 16" Cordless Battery Chainsaw w/ Two (2) 4.0Ah USB Batteries & Dual Port Charger

Additional Details More information about this product

Product intro

The Greenworks 24V POWERALL™ lithium-ion platform powers 200+ indoor & outdoor products, including lawn mowers, blowers, string trimmers, chainsaws, power tools and more! Our 24V lithium-ion battery provides 20% more power and 35% more run-time, and delivers fade-free power with no memory loss after charging. The outdoor power equipment is ideal for tackling yards up to 1/3 acre. The Greenworks 24V POWERALL™ platform comes with a 3 Year Limited Tool & Battery Warranty to protect your investment.

Key features

Two Greenworks 24V POWERALL™ batteries combine for 48V (24V x 2) of exceptional -better than gas power - without leaving the 24V battery platform
Intelligent brushless Motor Technology. 2x More Torque. Provides More Power, Longer Runtimes, Quiet Operation, and Extended Motor Life
16" bar and chain (low kickback) with chain brake for added protection
High chain speed (0 - 3,940 FPM) provides quick and easy cuts to get your job done faster
Up to 150 cuts on 4x4 lumber with included batteries
Auto-oiler mechanism ensures the chain stays lubricated, and the oil level indicator window allows you to gauge oil usage
Pro style chain tensioning provides maximum bar retention to allow you to keep cutting longer before tensioning chain
Electric start - no gas or fumes, no carburetor, no spark plug, and no pull cord
Wrap-around handle is ergonomically designed for felling and limbing
Compatible with Greenworks 24V Li-Ion system for fade-free power with no memory loss after charging and an assortment of tools to complete all your indoor and outdoor projects
Includes two 4.0 Ah batteries and charger
3 Year Limited Tool & Battery Warranty

The No List

No Gas Smell.

No Emissions.

No Maintenance.

Low Noise.

What's Included Everything that comes with this product

(1) 48V Brushless 16" Chainsaw
(2) 24V 4.0 Ah USB Batteries
(1) Dual-Port Battery Charger
(1) Blade Sheath
(1) Owner's Manual

Help & FAQ Answers to the most frequently asked questions

What oil do I use with my chainsaw?

Our units use a standard bar and chain oil. You can purchase this from your local hardware store; no specific brand name is required

Why is my chainsaw leaking oil?

All chainsaws will slowly “leak” oil in storage (mostly from it seeping off the chain). To prevent excessive leakage, store with as little oil left in the reservoir as possible, lay the chainsaw flat with a rag beneath it and the pole saw upright with the motor head at the top. During first use, operators should only fill the reservoir to roughly half full and check periodically to see if it needs to be refilled. Eventually, you will become accustomed to the amount of oil required for each job. This procedure will make it easier to store the unit as oil free as possible and reduce oil run off.

How large of a branch/log can I cut?

If you are looking to cut logs with one pass, the log needs to be about 2\" smaller than the bar. However, there are many techniques to use a chainsaw for larger cuts.

What is the run time?

The run time of a chainsaw is measured in cuts per charge. The number of cuts per charge or “run time” that you receive would depend on the load acting on the saw (i.e., the thickness and type of wood being cut) as the chainsaw would use more battery power on tougher and thick objects being cut.

How do I know if my chain is tensioned enough?

Chains should be tensioned before use. Check intermittently throughout each chore to make sure the chain is kept properly tensioned. A correctly tensioned chain should only pull away from the bar enough to fit a dime between the teeth and the bar. ***DO NOT TENSION A CHAIN AFTER YOU HAVE FINSHED USING THE TOOL. HOT METAL EXPANDS. IF THE CHAIN NEEDS TENSIONED WHEN HOT, THEN ALLOW TO COOL, THE CONTRACTING METAL COULD POTENTIALLY DAMAGE THE CHAIN, THE BAR AND EVEN THE UNIT. WAIT UNTIL THE NEXT USE (OR AT LEAST UNTIL COOLED) BEFORE TENSIONING***

Can I use another brand of chain?

Yes, however, it must match the specifications of the original chain (gauge, pitch, and drive links). These specifications my be found inside of your owner’s manual.

What file size do I use to sharpen the chain?

Our chains may be sharpened using a 5/32” round file.

Why isn’t my chain cutting?

If the wood is burning/smoking, this indicates that the chain is on backwards. Another reason could be that the chain is dull and needs to be sharpened or replaced. Replace the chain if: • The length of the cutting edges is less than 5 mm. • There is too much space between the drive links and the rivets. • The cut speed is slow • Sharpening the chain many times but it does not increase the cutting speed.

Why does my chain keep falling off?

Chainsaw chains can come off due to multiple reasons such as worn-down bars, worn-down sprockets, and wrongly set chain tension. Please check the chain tension and condition of all parts prior to using. If anything is worn or damaged, replace parts before using again. Replace the bar if: • the groove is not fit with the height of the drive links (which must never touch the bottom). • the inside of the guide bar is worn and make the chain lean to one side.

About Greenworks See how Greenworks is always making life better

20+ Years of Battery-First Innovation.

We’ve been pioneers of battery-powered outdoor tools since 2002, designing smarter tools with battery technology at their core to get work done faster.

#1 Battery Brand for Commercial Landscapers.

Trusted by professionals worldwide for performance, durability, and reliability, our tools are built to handle real-world all-day work.

Power That Replaces Gas Without the Hassle.

Sustainable technology delivers more power, longer runtimes, and zero gas, fumes, or engine maintenance, saving you time, money, and trouble.

One Battery. Endless Possibilities.

Choose the right voltage platform for your needs and share batteries across hundreds of tools in the yard, garage, jobsite, and beyond.

Smartly Designed. Built to Last.

Designed and engineered in-house for cleaner, quieter, smarter performance, with purpose-driven features that fit seamlessly into everyday life.

Proven Across 500+ Tools and Applications.

From maintaining your backyard to powering large jobsites, our battery expertise scales across 500+ professional and consumer tools built for real-world use.

Specifications & Guides

Key specifications not available.